반응형
| Standard Number | Standard Title |
| 1 | Standard for Flexible Metal Conduit |
| 4 | Standard for Armored Cableaa |
| 5 | Standard for Surface Metal Raceways and Fittings |
| 5A | Nonmetallic Surface Raceways and Fittings |
| 5B | Standard for Strut-Type Channel Raceways and Fittings |
| 5C | Standard for Surface Raceways and Fittings for Use with Data, Signal, and Control Circuits |
| 6 | Electrical Rigid Metal Conduit - Steel |
| 6A | Electrical Rigid Metal Conduit - Aluminum, Red Brass, and Stainless Steel |
| 7 | Outline of Investigation for Pump Tank Extinguishers |
| 8 | Water Based Agent Fire Extinguishers |
| 9 | Standard for Fire Tests of Window Assemblies |
| 10A | Standard for Tin-Clad Fire Doors |
| 10B | Standard for Fire Tests of Door Assemblies |
| 10C | Standard for Positive Pressure Fire Tests of Door Assemblies |
| 10D | Standard for Fire Tests of Fire-Protective Curtain Assemblies |
| 13 | Standard for Power-Limited Circuit Cables |
| 14B | Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors |
| 14C | Standard for Swinging Hardware for Standard Tin-Clad Fire Doors Mounted Singly and in Pairs |
| 19 | Standard for Lined Fire Hose and Hose Assemblies |
| 19G | Guidance for Lined Fire Hose and Hose Assemblies |
| 20 | General-Use Snap Switches |
| 21 | Standard for LP-Gas Hose |
| 22 | Standard for Amusement and Gaming Machines |
| 25 | Standard for Meters for Flammable and Combustible Liquids and LP-Gas |
| 25A | Standard for Meters for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 25B | Meters for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 30 | Standard for Metal Safety Cans |
| 32 | Standard for Metal Waste Cans |
| 33 | Standard for Heat Responsive Links for Fire-Protection Service |
| 38 | Standard for Manual Signaling Boxes for Fire Alarm Systems |
| 44 | Thermoset-Insulated Wires and Cables |
| 45A | Outline of Investigation for Transportable and Special Purpose Portable Electric Tools |
| 47 | Standard for Semiautomatic Fire Hose Storage Devices |
| 48 | Standard for Electric Signs |
| 50 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| 50 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| 50E | Enclosures for Electrical Equipment, Environmental Considerations |
| 50E | Enclosures for Electrical Equipment, Environmental Considerations |
| 50V | Outline of Investigation for Infrared Viewports |
| 50V | Outline of Investigation for Infrared Viewports |
| 51 | Standard for Power-Operated Pumps and Bypass Valves for Anhydrous Ammonia, LP-Gas, and Propylene |
| 55A | Standard for Materials for Built-Up Roof Coverings |
| 58 | Standard for Steel Underground Tanks for Flammable and Combustible Liquids |
| 62 | Flexible Cords and Cables |
| 63 | Outline of Investigation for Fire Door Frames |
| 65 | Standard for Wired Cabinets |
| 66 | Fixture Wire |
| 67 | Standard for Panelboards |
| 69 | Standard for Electric-Fence Controllers |
| 70 | Standard for Septic Tanks, Bituminous-Coated Metal |
| 72 | Standard for Tests for Fire Resistance of Record Protection Equipment |
| 73 | Standard for Motor-Operated Appliances |
| 75 | Outline for Portable Containers and Tanks for Flammable and/or Combustible Liquids |
| 79 | Standard for Power-Operated Pumps for Petroleum Dispensing Products |
| 79A | Standard for Power-Operated Pumps for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 79B | Standard for Power-Operated Pumps for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 80 | Standard for Steel Tanks for Oil-Burner Fuels and Other Combustible Liquids |
| 80.1 | NONMETALLIC TANKS FOR OIL-BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS |
| 82 | Standard for Electric Gardening Appliances |
| 83 | Thermoplastic-Insulated Wires and Cables |
| 83A | Standard for Fluoropolymer Insulated Wire |
| 87 | Standard for Power-Operated Dispensing Devices for Petroleum Products |
| 87A | Standard for Power-Operated Dispensing Devices for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 87B | Power-Operated Dispensing Devices for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 87C | Outline of Investigation for Power-Operated Dispensing Devices for Diesel Exhaust Fluid |
| 92 | Standard for Fire Extinguisher and Booster Hose |
| 94 | Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances |
| 96 | ANSI/CAN/UL Standard for Lightning Protection Components |
| 96A | Standard for Installation Requirements for Lightning Protection Systems |
| 98 | Enclosed and Dead-Front Switches |
| 98A | Outline of Investigation for Open Type Switches |
| 98B | Outline of Investigation for Enclosed and Dead-front Switches for use in Photovoltaic Systems |
| 98C | Outline of Investigation for Enclosed and Dead-Front Switches, 650 - 1000 Volts |
| 100 | SMOKE CONTROL SYSTEM EQUIPMENT |
| 100 | Standard for Sustainability for Gypsum Boards and Panels |
| 101 | Leakage Current for Appliances |
| 102 | STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF BUILDING MATERIALS AND ASSEMBLIES |
| 102 | Standard for Sustainability for Door Leafs |
| 102.2 | STANDARD METHOD OF TEST FOR SURFACE BURNING CHARACTERISTICS OF FLOORING, FLOOR COVERINGS, AND MISCELLANEOUS MATERIALS AND ASSEMBLIES |
| 102.3 | STANDARD METHOD OF FIRE TEST OF LIGHT DIFFUSERS AND LENSES |
| 102.4 | STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS |
| 102.4 | STANDARD METHOD OF TEST FOR FIRE AND SMOKE CHARACTERISTICS OF ELECTRICAL WIRING, CABLES AND NON-METALLIC RACEWAYS |
| 103 | Standard for Factory-Built Chimneys for Residential Type and Building Heating Appliances |
| 103 | STANDARD SPECIFICATION FOR “TIN-CLAD” FIRE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104 |
| 103A | Outline of Investigation for Masonry Fireplace Adapters for Residential Type and Building Heating Appliance Chimneys |
| 104 | Standard for Elevator Door Locking Devices and Contacts |
| 104 | STANDARD METHOD FOR FIRE TESTS OF DOOR ASSEMBLIES |
| 105 | STANDARD SPECIFICATION FOR FIRE DOOR FRAMES MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104 |
| 106 | STANDARD METHOD FOR FIRE TESTS OF WINDOW AND GLASS BLOCK ASSEMBLIES |
| 107 | STANDARD METHODS OF FIRE TESTS OF ROOF COVERINGS |
| 108 | Environmental Claim Validation Procedure for Estimating Energy Savings for Energy Saving Power Strips |
| 109 | Standard for Tube Fittings for Flammable and Combustible Fluids, Refrigeration Service, and Marine Use |
| 109 | STANDARD METHOD FOR FLAME TESTS OF FLAME-RESISTANT FABRICS AND FILMS |
| 110 | STANDARD METHODS OF TEST FOR AIR DUCTS |
| 110 | Standard for Sustainability for Mobile Phones |
| 111 | Outline of Investigation for Multioutlet Assemblies |
| 111 | STANDARD METHOD OF FIRE TESTS FOR AIR FILTER UNITS |
| 112 | STANDARD METHOD OF FIRE TEST OF FIRE DAMPER ASSEMBLIES |
| 112.1 | STANDARD FOR LEAKAGE RATED DAMPERS FOR USE IN SMOKE CONTROL SYSTEMS |
| 113 | STANDARD SPECIFICATION FOR WOOD CORE DOORS MEETING THE PERFORMANCE REQUIRED BY CAN/ULC-S104 FOR TWENTY MINUTE FIRE RATED CLOSURE ASSEMBLIES |
| 113 | Procedure for the Preparation of a Toxicological Assessment |
| 114 | STANDARD METHOD OF TEST FOR DETERMINATION OF NON-COMBUSTIBILITY IN BUILDING MATERIALS |
| 115 | STANDARD METHOD OF FIRE TESTS OF FIRESTOP SYSTEMS |
| 115 | STANDARD METHOD OF FIRE TESTS OF FIRESTOP SYSTEMS |
| 119 | Outline of Investigation for Adapters, Fittings and Couplings for Anhydrous Ammonia and Fuel Gases |
| 122 | Standard for Photographic Equipment |
| 123 | Standard for Oxy-Fuel Gas Torches |
| 124 | Outline of Investigation for Hand-Operated Pumps for Flammable and Combustible Liquids |
| 124 | STANDARD METHOD OF TEST FOR THE EVALUATION OF THERMAL BARRIERS FOR FOAMED PLASTIC |
| 125 | Standard for Flow Control Valves for Anhydrous Ammonia and LP-Gas |
| 126 | STANDARD METHOD OF TEST FOR FIRE SPREAD UNDER ROOF-DECK ASSEMBLIES |
| 126 | Standard for Sustainability for Plastic Film Products |
| 127 | Standard for Factory-Built Fireplaces |
| 127 | STANDARD CORNER WALL METHOD OF TEST FOR FLAMMABILITY CHARACTERISTICS OF NON-MELTING FOAM PLASTIC BUILDING MATERIALS |
| 129 | STANDARD METHOD OF TEST FOR SMOULDER RESISTANCE OF INSULATION (BASKET METHOD) |
| 130 | Standard for Electric Heating Pads |
| 130 | STANDARD METHOD OF TEST FOR IGNITION RESISTANCE OF LOOSE FILL INSULATION (CIGARETTE METHOD) |
| 132 | Standard for Safety Relief Valves for Anhydrous Ammonia and LP-Gas |
| 132 | STANDARD METHOD OF TESTS FOR EMERGENCY EXIT AND EMERGENCY FIRE EXIT HARDWARE |
| 133 | STANDARD METHOD OF TESTS FOR DOOR CLOSERS INTENDED FOR USE WITH SWINGING DOORS |
| 134 | STANDARD METHOD OF FIRE TEST OF EXTERIOR WALL ASSEMBLIES |
| 136 | Standard for Pressure Cookers |
| 139 | Outline of Investigation for Medium- and High-Expansion Foam-Extinguishing System Equipment and Concentrates |
| 139 | Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables |
| 140 | Standard for Relocking Devices for Safes and Vaults |
| 141 | Standard for Garment Finishing Appliances |
| 142 | Standard for Steel Aboveground Tanks for Flammable and Combustible Liquids |
| 142 | STANDARD METHOD OF FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS |
| 142.15 | PRECAST CONCRETE TANKS |
| 142A | Standard for Special Purpose Aboveground Tanks for Specific Flammable or Combustible Liquids |
| 143 | STANDARD METHOD OF FIRE TESTS FOR NON-METALLIC ELECTRICAL AND OPTICAL FIBRE CABLE RACEWAY SYSTEMS |
| 144 | Standard for LP-Gas Regulators |
| 144 | STANDARD METHOD OF FIRE RESISTANCE TEST - GREASE DUCT ASSEMBLIES |
| 145 | STANDARD METHOD OF TEST FOR THE EVALUATION OF PROTECTIVE COVERINGS FOR FOAMED PLASTIC INSULATION - FULL-SCALE ROOM TEST |
| 147 | Standard for Hand-Held Torches for Fuel Gases |
| 147A | Standard for Nonrefillable (Disposable) Type Fuel Gas Cylinder Assemblies |
| 147B | Standard for Nonrefillable (Disposable) Type Metal Container Assemblies for Butane |
| 150 | Standard for Antenna Rotators |
| 153 | Standard for Portable Electric Luminaires |
| 154 | Carbon-Dioxide Fire Extinguishers |
| 155 | Standard for Tests for Fire Resistance of Vault and File Room Doors |
| 157 | Standard for Gaskets and Seals |
| 162 | Standard for Foam Equipment and Liquid Concentrates |
| 162A | Outline of Investigation for Fixed Water-Motor Coupled Pumps for Foam Concentrate Proportioning |
| 172 | Standard for Sustainability for Toys |
| 174 | Standard for Household Electric Storage Tank Water Heaters |
| 175 | Standard for Sustainability for Sanitary Paper Products |
| 180 | Standard for Combustible Liquid Tank Accessories |
| 181 | Standard for Factory-Made Air Ducts and Air Connectors |
| 181A | Standard for Closure Systems for Use With Rigid Air Ducts |
| 181B | Standard for Closure Systems for Use With Flexible Air Ducts and Air Connectors |
| 183 | Standard for Manufactured Wiring Systems |
| 193 | Standard for Alarm Valves for Fire-Protection Service |
| 194 | Standard for Gasketed Joints for Ductile-Iron Pipe and Fittings for Fire Protection Service |
| 197 | Standard for Commercial Electric Cooking Appliances |
| 198M | Standard for Mine-Duty Fuses |
| 199 | Standard for Automatic Sprinklers for Fire-Protection Service |
| 199B | Control Cabinets For Automatic Sprinkler Systems Used For Protection Of Commercial Cooking Equipment |
| 199C | Outline of Investigation for Plastic Escutcheons for Sprinklers |
| 199D | Outline of Investigation for Guards for Sprinklers |
| 199E | Outline of Investigation for Fire Testing of Sprinklers and Water Spray Nozzles for Protection of Deep Fat Fryers |
| 199G | Outline of Investigation for Fire Testing of Specific Application Sprinklers for Use in Attic Spaces |
| 199H | Outline of Investigation for Fire Testing Of Specific Application Sprinklers For Use In Horizontal Concealed Spaces |
| 199J | Outline of Investigation for Fire Testing of Specific Application Sprinklers for Use on Windows |
| 201 | Standard for Garage Equipment |
| 203 | Standard for Pipe Hanger Equipment for Fire Protection Service |
| 203A | Standard for Sway Brace Devices for Sprinkler System Piping |
| 207 | Standard for Refrigerant-Containing Components and Accessories, Nonelectrical |
| 209 | Standard for Cellular Metal Floor Raceways and Fittings |
| 212 | Outline of Investigation for Hand-Operated Chemical Pumps |
| 213 | Standard for Rubber Gasketed Fittings for Fire-Protection Service |
| 213 | Standard for Rubber Gasketed Fittings for Fire-Protection Service |
| 213B | Outline of Investigation for Welded Outlet Fittings for Fire Protection Systems |
| 213C | Standard for Grooved and Plain End Fittings |
| 217 | Standard for Smoke Alarms |
| 218 | Fire Pump Controllers |
| 218A | Standard for Battery Contactors for Use in Diesel Engines Driving Centrifugal Fire Pumps |
| 219 | Standard for Lined Fire Hose for Interior Standpipes |
| 224 | Extruded Insulating Tubing |
| 228 | Standard for Door Closers-Holders, With or Without Integral Smoke Detectors |
| 231 | Standard for Power Outlets |
| 234 | Standard for Low Voltage Lighting Fixtures for Use in Recreational Vehicles |
| 242 | Standard for Nonmetallic Containers for Waste Paper |
| 244A | Standard for Solid-State Controls for Appliances |
| 244B | Outline of Investigation for Cord-Connected Controls with Standard NEMA Plugs and Receptacles, Direct Plug-In Controls, and Controls Intended to be Mounted in Wiring Boxes |
| 246 | Standard for Hydrants for Fire-Protection Service |
| 246A | Outline of Investigation for Non-Threaded Connections for Fire Hydrants and Fire Department Connections |
| 246B | Outline of Investigation for Tamper Resistant Features of Hydrants for Fire-Protection Service |
| 246C | Outline of Investigation for Wet Barrel Fire Hydrants for Oil Platforms |
| 248-1 | Low-Voltage Fuses - Part 1: General Requirements |
| 248-2 | Low-Voltage Fuses - Part 2: Class C Fuses |
| 248-3 | Low-Voltage Fuses - Part 3: Class CA and CB Fuses |
| 248-4 | Low-Voltage Fuses - Part 4: Class CC Fuses |
| 248-5 | Low-Voltage Fuses - Part 5: Class G Fuses |
| 248-6 | Low-Voltage Fuses - Part 6: Class H Non-Renewable Fuses |
| 248-7 | Low-Voltage Fuses - Part 7: Class H Renewable Fuses |
| 248-8 | Low-Voltage Fuses - Part 8: Class J Fuses |
| 248-9 | Low-Voltage Fuses - Part 9: Class K Fuses |
| 248-10 | Low-Voltage Fuses - Part 10: Class L Fuses |
| 248-11 | Low-Voltage Fuses - Part 11: Plug Fuses |
| 248-12 | Low-Voltage Fuses - Part 12: Class R Fuses |
| 248-13 | Low-Voltage Fuses - Part 13: Semiconductor Fuses |
| 248-14 | Low-Voltage Fuses - Part 14: Supplemental Fuses |
| 248-15 | Low-Voltage Fuses - Part 15: Class T Fuses |
| 248-16 | Low-Voltage Fuses - Part 16: Test Limiters |
| 248-17 | Outline of Investigation for Low-Voltage Fuses - Part 17: Class CF Fuses |
| 248-18 | Outline of Investigation for Low Voltage Fuses - Class CD Fuses |
| 248-19 | Low-Voltage Fuses - Part 19: Photovoltaic Fuses |
| 248-20 | Outline of Investigation for Low-Voltage Fuses - Part 20: Electric Vehicle (EV) Fuses |
| 252 | Standard for Compressed Gas Regulators |
| 252A | Standard for Compressed Gas Regulator Accessories |
| 258 | Outline of Investigation for Shutoff Valves for Trim and Drain Purposes |
| 260 | Standard for Dry Pipe and Deluge Valves for Fire-Protection Service |
| 260A | Outline of Investigation for Air Pressure Maintenance Devices |
| 262 | Standard for Gate Valves for Fire-Protection Service |
| 263 | Standard for Fire Tests of Building Construction and Materials |
| 267 | Outline of Investigation for Wire-Pulling Compounds |
| 268 | Smoke Detectors for Fire Alarm Systems |
| 268 | Smoke Detectors for Fire Alarm Systems |
| 268A | Standard for Smoke Detectors for Duct Application |
| 268B | Outline of Investigation for Video Image Smoke Detectors |
| 268C | Outline of Investigation for Multi-Detector Test Apparatus |
| 275 | Standard for Automotive Glass-Tube Fuses |
| 275A | Outline of Investigation for Automotive Blade Type Fuses |
| 283 | Standard for Air Fresheners and Deodorizers |
| 291 | Standard for Automated Teller Systems |
| 293 | Outline of Investigation for Performance of Access Control System Units Intended for Use in the UK |
| 294 | Standard for Access Control System Units |
| 294 | Standard for Access Control System Units |
| 294B | Standard for Power Over Ethernet (PoE) Power Sources for Access Control Systems and Equipment |
| 295 | Standard for Commercial-Industrial Gas Burners |
| 296 | Standard for Oil Burners |
| 296A | Standard for Waste Oil-Burning Air-Heating Appliances |
| 299 | Dry Chemical Fire Extinguishers |
| 299A | Outline of Investigation for Portable Dry Chemical Extinguishing System Units |
| 299B | Outline of Investigation for Dry Chemical Fire Extinguishers for U.S. Navy Applications |
| 299C | Outline of Investigation for Fire Extinguishing Dry Chemical for Special Applications |
| 299D | Outline of Investigation for Dry Chemical Fire Extinguishers for Residential Cooking Equipment |
| 300 | Standard for Fire Testing of Fire Extinguishing Systems for Protection of Commercial Cooking Equipment |
| 300A | Outline of Investigation for Extinguishing System Units for Residential Range Top Cooking Surfaces |
| 301 | STANDARD FOR SIGNAL RECEIVING CENTRES CONFIGURATIONS AND OPERATIONS |
| 302 | STANDARD FOR THE INSTALLATION, INSPECTION AND TESTING OF INTRUSION ALARM SYSTEMS |
| 304 | STANDARD FOR CONTROL UNITS, ACCESSORIES AND RECEIVING EQUIPMENT FOR INTRUSION ALARM SYSTEMS |
| 305 | Standard for Panic Hardware |
| 307A | Standard for Liquid Fuel-Burning Heating Appliances for Manufactured Homes and Recreational Vehicles |
| 307B | Standard for Gas-Burning Heating Appliances For Manufactured Homes and Recreational Vehicles |
| 310 | Electrical Quick-Connect Terminals |
| 312 | Standard for Check Valves for Fire-Protection Service |
| 316 | STANDARD FOR PERFORMANCE OF VIDEO SURVEILLANCE SYSTEMS |
| 321 | Outline of Investigation for Pipeline Strainers |
| 325 | ANSI/CAN/UL Standard for Door, Drapery, Gate, Louver, and Window Operators and Systems |
| 327 | Outline of Investigation for Turbine Type Flow Meters for Fire Protection Systems |
| 327A | Outline of Investigation for Inferential Type Residential Water Flow Meters |
| 327B | Outline of Investigation for Ultrasonic and Magnetic Type Water Flow Meters |
| 328 | Outline of Investigation for Gasoline Torches |
| 330 | Standard for Hose and Hose Assemblies for Dispensing Flammable Liquids |
| 330A | Standard for Hose and Hose Assemblies for Use With Dispensing Devices Dispensing Gasoline and Gasoline/Ethanol Blends With Nominal Ethanol Concentrations Up To 85 Percent (E0 - E85) |
| 330B | Standard for Hose and Hose Assemblies for Use With Dispensing Devices Dispensing Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends With Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil |
| 331 | Standard for Strainers for Flammable Fluids and Anhydrous Ammonia |
| 331A | Standard for Strainers for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 331B | Strainers for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 331C | Outline of Investigation for Fuel Filtration Units |
| 334 | Theater Lighting Distribution and Control Equipment |
| 338 | STANDARD FOR AUTOMOBILE THEFT DETERRENT EQUIPMENT AND SYSTEMS: ELECTRONIC IMMOBILIZATION |
| 340 | Standard for Tests for Comparative Flammability of Liquids |
| 343 | Standard for Pumps for Oil-Burning Appliances |
| 346 | Standard for Waterflow Indicators for Fire Protective Signaling Systems |
| 347 | Medium-Voltage AC Contactors, Controllers, and Control Centers |
| 347A | Standard for Medium Voltage Power Conversion Equipment |
| 347B | Outline of Investigation for Medium Voltage Motor Controllers, Up To 15KV |
| 347C | Outline of Investigation for Medium Voltage Solid State Resistive Load Controllers, Up to 15KV |
| 347D | Outline of Investigation for Medium Voltage Stator Switching Assemblies for Wind Applications, Up to 15KV |
| 353 | Standard for Limit Controls |
| 355 | Standard for Cord Reels |
| 360 | Standard for Liquid-Tight Flexible Metal Conduit |
| 363 | Knife Switches |
| 365 | Standard for Police Station Connected Burglar Alarm Units and Systems |
| 372 | Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Burner Ignition Systems and Components |
| 372 | Standard for Primary Safety Controls for Gas- and Oil-Fired Appliances |
| 378 | Standard for Draft Equipment |
| 379 | Standard for Power Units for Fountain, Swimming Pool, and Spa Luminaires |
| 385 | Standard for Play Pipes for Water Supply Testing in Fire Protection Service |
| 386 | FLAME DETECTORS |
| 391 | Standard for Solid-Fuel and Combination-Fuel Central and Supplementary Furnaces |
| 393 | Standard for Indicating Pressure Gauges for Fire-Protection Service |
| 399 | Standard for Drinking-Water Coolers |
| 401 | Standard for Portable Spray Hose Nozzles for Fire-Protection Service |
| 404 | Standard for Gauges, Indicating Pressure, for Compressed Gas Service |
| 405 | Standard for Fire Department Connection Devices |
| 407 | Standard for Manifolds for Compressed Gases |
| 410 | Standard for Slip Resistance of Floor Surface Materials |
| 412 | Standard for Refrigeration Unit Coolers |
| 414 | Standard for Meter Sockets |
| 416 | Standard for Refrigerated Medical Equipment |
| 420 | LIGHT EMITTING DIODE (LED) EQUIPMENT FOR USE IN LIGHTING PRODUCTS |
| 427 | Standard for Refrigerating Units |
| 428A | Standard for Electrically Operated Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations Up to 85 Percent (E0 - E85) |
| 428B | Standard for Electrically Operated Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations Up To 20 Percent (B20), Kerosene, and Fuel Oil |
| 429 | Standard for Electrically Operated Valves |
| 429 | Standard for Electrically Operated Valves |
| 429A | Outline of Investigation for Electrically Operated Valves for Fire Protection Service |
| 430 | Standard for Waste Disposers |
| 437 | Standard for Key Locks |
| 441 | Standard for Gas Vents |
| 443 | Standard for Steel Auxiliary Tanks for Oil-Burner Fuel |
| 444 | Communications Cables |
| 448 | Standard for Centrifugal Stationary Pumps for Fire-Protection Service |
| 448A | Standard for Flexible Couplings and Connecting Shafts for Stationary Fire Pumps |
| 448B | Standard for Residential Fire Pumps Intended for One- and Two-Family Dwellings and Manufactured Homes |
| 448C | Standard for Stationary, Rotary-Type, Positive-Displacement Pumps for Fire-Protection Service |
| 448D | Outline of Investigation for Fire Pump, Driver and Controller Assembly Rating Compatibility |
| 452 | Standard for Antenna - Discharge Units |
| 458 | Standard for Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts |
| 458A | Outline of Investigation for Power Converters/Inverters for Electric Land Vehicles |
| 462 | Standard for Heat Reclaimers for Gas-, Oil-, or Solid Fuel-Fired Appliances |
| 464 | Audible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories |
| 464A | Standard for Audible Signal Appliances for General Signaling Use |
| 466 | Standard for Electric Scales |
| 467 | Grounding and Bonding Equipment |
| 469 | Standard for Musical Instruments and Accessories |
| 471 | Standard for Commercial Refrigerators and Freezers |
| 482 | Standard for Portable Sun/Heat Lamps |
| 484 | Standard for Room Air Conditioners |
| 486A-486B | Wire Connectors |
| 486C | Splicing Wire Connectors |
| 486D | Sealed Wire Connector Systems |
| 486E | Standard for Equipment Wiring Terminals for Use with Aluminum and/or Copper Conductors |
| 486F | Bare and Covered Ferrules |
| 486G | Sealed Twist-On Connecting Devices |
| 489 | Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures |
| 489A | Standard for Circuit Breakers for Use in Communications Equipment |
| 489B | Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures for Use with Photovoltaic (PV) Systems |
| 489C | Outline of Investigation for Molded-Case Circuit Breakers and Molded-Case Switches for Use with Wind Turbines |
| 489D | Outline of Investigation for US Naval Commercial-Off-The-Shelf (COTS) Designated Molded-Case Circuit Breakers and Accessories for Use on Non-Nuclear Naval Combatant Ships |
| 489F | Outline of Investigation for Molded-Case Circuit Breakers and Molded-Case Switches for Use with Battery Power Supplies |
| 489G | Outline of Investigation for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures, 650 - 1000 Volts AC and 650 - 1500 Volts DC |
| 489H | Outline of Investigation for Molded-Case Circuit Breakers, Molded-Case Switches, and Circuit-Breaker Enclosures, for Use with Direct Current (DC) Microgrids |
| 489I | Outline of Investigation for Solid State Molded-Case Circuit Breakers |
| 493 | Standard for Thermoplastic-Insulated Underground Feeder and Branch-Circuit Cables |
| 495 | Standard for Power-Operated Dispensing Devices for LP-Gas |
| 496 | Lampholders |
| 497 | Standard for Protectors for Paired-Conductor Communications Circuits |
| 497A | Standard for Secondary Protectors for Communications Circuits |
| 497B | Standard for Protectors for Data Communications and Fire-Alarm Circuits |
| 497C | Standard for Protectors for Coaxial Communications Circuits |
| 497D | Outline of Investigation for Component Secondary Protectors for Communications Circuits Used with Specified Voltage Supression |
| 497E | Outline of Investigation for Protectors for Antenna Lead-In Conductors |
| 498 | Standard for Attachment Plugs and Receptacles |
| 498A | Current Taps and Adapters |
| 498B | Outline of Investigation for Receptacles with Integral Switching Means |
| 498C | Flatiron and Appliance Plugs |
| 499 | Standard for Electric Heating Appliances |
| 503 | Standard for Carbon-Dioxide Fire Extinguishers |
| 504 | Dry Chemical Fire Extinguishers |
| 504 | Outline of Investigation for Mineral-Insulated, Metal-Sheathed Cable |
| 506 | Standard for Specialty Transformers |
| 507 | Standard for Electric Fans |
| 507 | Water Fire Extinguishers |
| 508 | Standard for Industrial Control Equipment |
| 508 | Rating and Fire Testing of Fire Extinguishers |
| 508 | Standard for Rating and Fire Testing of Fire Extinguishers |
| 508A | Standard for Industrial Control Panels |
| 508B | Outline of Investigation for Relays Used in Information Technology Equipment |
| 508C | Standard for Power Conversion Equipment |
| 508E | Outline of Investigation for IEC Type '2' Coordination Short Circuit Tests of Electromechanical Motor Controllers in Accordance with IEC Publication 947-4-1 |
| 508I | Outline of Investigation for Disconnect Switches Intended for Use in Photovoltaic Systems |
| 509 | Outline of Investigation for Bus Drop Cable |
| 510 | Standard for Polyvinyl Chloride, Polyethylene and Rubber Insulating Tape |
| 510A | Standard for Component Tapes |
| 511 | STANDARD FOR LINED FIRE HOSE FOR INTERIOR STANDPIPES AND MUNICIPAL AND INDUSTRIAL FIRE PROTECTION SERVICES |
| 513 | STANDARD FOR THREADED COUPLINGS FOR 38 MM AND 65 MM FIRE HOSE |
| 514 | STANDARD FOR DRY CHEMICAL FOR USE IN HAND AND WHEELED FIRE EXTINGUISHERS |
| 514A | Metallic Outlet Boxes |
| 514B | Conduit, Tubing, and Cable Fittings |
| 514C | Standard for Nonmetallic Outlet Boxes, Flush-Device Boxes, and Covers |
| 514D | Cover Plates for Flush-Mounted Wiring Devices |
| 515 | STANDARD FOR AUTOMOBILE FIRE FIGHTING APPARATUS |
| 515 | Standard for Electrical Resistance Trace Heating for Commercial Applications |
| 515A | Outline of Investigation for Electrical Resistance Trace Heating and Associated Controls for Use In Sprinkler and Standpipe Systems |
| 518 | STANDARD FOR COTTON-SYNTHETIC NON-PERCOLATING FORESTRY HOSE |
| 518.1 | SYNTHETIC NON-PERCOLATING FORESTRY HOSE |
| 519 | STANDARD FOR COTTON-SYNTHETIC PERCOLATING FORESTRY HOSE |
| 519.1 | STANDARD FOR SYNTHETIC PERCOLATING FORESTRY HOSE |
| 520 | STANDARD FOR FIRE HYDRANTS |
| 521 | Standard for Heat Detectors for Fire Protective Signaling Systems |
| 522 | STANDARD FOR FIRE EXTINGUISHER AND BOOSTER HOSE |
| 523 | Outline of Investigation for Telephone Service Drop Wire |
| 524 | STANDARD FOR INSTALLATION OF FIRE ALARM SYSTEMS |
| 525 | Standard for Flame Arresters |
| 525 | Audible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories |
| 526 | Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories |
| 527 | STANDARD FOR CONTROL UNITS FOR FIRE ALARM SYSTEMS |
| 528 | STANDARD FOR MANUAL STATIONS FOR FIRE ALARM SYSTEMS, INCLUDING ACCESSORIES |
| 529 | Standard for Smoke Detectors for Fire Alarm Systems |
| 529A | VIDEO IMAGE SMOKE DETECTION SYSTEM DEVICES |
| 530 | STANDARD FOR HEAT ACTUATED FIRE DETECTORS FOR FIRE ALARM SYSTEMS |
| 531 | STANDARD FOR SMOKE ALARMS |
| 532 | STANDARD FOR THE REGULATION OF THE SERVICING OF PORTABLE FIRE EXTINGUISHERS |
| 533 | STANDARD FOR EGRESS DOOR SECURING AND RELEASING DEVICES |
| 536 | Standard for Flexible Metallic Hose |
| 536 | STANDARD FOR INSPECTION AND TESTING OF FIRE ALARM SYSTEMS |
| 537 | STANDARD FOR VERIFICATION OF FIRE ALARM SYSTEMS |
| 539 | Standard for Single and Multiple Station Heat Alarms |
| 539 | SINGLE AND MULTIPLE STATION HEAT ALARMS |
| 540 | STANDARD FOR RESIDENTIAL FIRE AND LIFE SAFETY WARNING SYSTEMS: INSTALLATION, INSPECTION, TESTING AND MAINTENANCE |
| 541 | Standard for Refrigerated Vending Machines |
| 541 | Speakers for Fire Alarm and Signaling Systems, Including Accessories |
| 542 | Standard for Fluorescent Lamp Starters |
| 546 | Outline of Investigation for Conductor Termination Compounds |
| 548 | STANDARD FOR DEVICES AND ACCESSORIES FOR WATER TYPE EXTINGUISHING SYSTEMS |
| 551 | Standard for Transformer-Type Arc-Welding Machines |
| 551 | STANDARD FOR FORGED EXTERNAL-LUG QUICK CONNECT COUPLINGS AND ADAPTORS FOR FORESTRY FIRE HOSE |
| 552 | STANDARD FOR INSPECTION, TESTING AND MAINTENANCE OF SMOKE ALARMS |
| 553 | STANDARD FOR INSTALLATION OF SMOKE ALARMS |
| 554 | Standard for Water Based Agent Fire Extinguishers |
| 555 | Standard for Fire Dampers |
| 555 | STANDARD FOR FIRE AND EMERGENCY SERVICE TECHNICAL RESCUE ROPES AND WATER RESCUE THROW ROPES AND ASSOCIATED EQUIPMENT |
| 555C | Standard for Ceiling Dampers |
| 555S | Standard for Smoke Dampers |
| 557 | STANDARD FOR BACK-PACK FIRE EXTINGUISHERS |
| 558 | Standard for Industrial Trucks, Internal Combustion Engine-Powered |
| 558 | STANDARD FOR EXTERNAL-LUG QUICK CONNECT COUPLINGS AND ADAPTORS FOR FORESTRY FIRE HOSE |
| 559 | STANDARD FOR EQUIPMENT FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS |
| 561 | Standard for Floor-Finishing Machines |
| 561 | STANDARD FOR INSTALLATION AND SERVICES FOR FIRE SIGNAL RECEIVING CENTRES AND SYSTEMS |
| 563 | Standard for Ice Makers |
| 565 | Standard for Liquid-Level Gauges for Anhydrous Ammonia and LP-Gas |
| 566 | Halocarbon Clean Agent Fire Extinguishers |
| 567 | Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Petroleum Products and LP-Gas |
| 567A | Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 567B | Standard for Emergency Breakaway Fittings, Swivel Connectors and Pipe-Connection Fittings for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 568 | Nonmetallic Cable Tray Systems |
| 569 | Standard for Pigtails and Flexible Hose Connectors for LP-Gas |
| 572 | STANDARD FOR PHOTOLUMINESCENT AND SELF-LUMINOUS EXIT SIGNS AND PATH MARKING SYSTEMS |
| 573 | STANDARD FOR INSTALLATION OF ANCILLARY DEVICES CONNECTED TO FIRE ALARM SYSTEMS |
| 574 | Standard for Electric Oil Heaters |
| 574 | STANDARD FOR FORGED 65 mm (2 1/2 in) EXTERNAL-LUG QUICK-CONNECT COUPLINGS AND ADAPTERS FOR FORESTRY FIRE HOSE |
| 576 | STANDARD FOR MASS NOTIFICATION SYSTEM EQUIPMENT AND ACCESSORIES |
| 580 | Standard for Tests for Uplift Resistance of Roof Assemblies |
| 583 | Standard for Electric-Battery-Powered Industrial Trucks |
| 586 | Standard for Safety for High-Efficiency, Particulate, Air Filter Units |
| 588 | Standard for Seasonal and Holiday Decorative Products |
| 588 | STANDARD FOR GAS AND VAPOUR DETECTORS AND SENSORS, INCLUDING ACCESSORIES |
| 601 | STANDARD FOR SHOP FABRICATED STEEL ABOVEGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 602 | STANDARD FOR ABOVEGROUND STEEL TANKS FOR FUEL OIL AND LUBRICATING OIL |
| 603 | Standard for Power Supplies for Use with Burglar-Alarm Systems |
| 603 | STANDARD FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 603.1 | STANDARD FOR EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 603.1 | EXTERNAL CORROSION PROTECTION SYSTEMS FOR STEEL UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 604 | STANDARD FOR FACTORY- BUILT TYPE A CHIMNEYS |
| 605 | STANDARD FOR GAS VENTS |
| 606 | Linings and Screens for Use with Burglar-Alarm Systems |
| 608 | Standard for Burglary Resistant Vault Doors and Modular Panels |
| 609 | Standard for Local Burglar Alarm Units and Systems |
| 609 | STANDARD FOR LOW TEMPERATURE VENTS TYPE L AND PL |
| 610 | STANDARD FOR FACTORY-BUILT FIREPLACE SYSTEMS |
| 612 | STANDARD FOR HOSE AND HOSE ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 618 | Standard for Concrete Masonry Units |
| 620 | STANDARD FOR HOSE NOZZLE VALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 621 | Standard for Ice Cream Makers |
| 626 | Water Fire Extinguishers |
| 629 | STANDARD FOR 650 °C FACTORY- BUILT CHIMNEYS |
| 633 | STANDARD FOR FLEXIBLE CONNECTOR PIPING FOR FUELS |
| 634 | Standard for Connectors and Switches for Use with Burglar-Alarm Systems |
| 634 | STANDARD FOR HOSE SWIVEL CONNECTORS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 634 | CONNECTORS AND SWITCHES FOR USE WITH BURGLAR ALARM SYSTEMS |
| 635 | Standard for Insulating Bushings |
| 635 | STANDARD FOR LINING SYSTEMS FOR EXISTING MASONRY OR FACTORY-BUILT CHIMNEYS AND VENTS |
| 636 | Standard for Holdup Alarm Units and Systems |
| 639 | Standard for Intrusion-Detection Units |
| 639 | STANDARD FOR STEEL LINER ASSEMBLIES FOR SOLID-FUEL BURNING MASONRY FIREPLACES |
| 640 | STANDARD FOR LINING SYSTEMS FOR NEW MASONRY CHIMNEYS |
| 641 | Standard for Type L Low-Temperature Venting Systems |
| 641 | STANDARD FOR FACTORY-BUILT CHIMNEY CONNECTORS AND WALL PASS-THROUGH ASSEMBLIES |
| 642 | STANDARD FOR COMPOUNDS AND TAPES FOR THREADED PIPE JOINTS |
| 644 | Standard for Container Assemblies for LP-Gas |
| 644 | STANDARD FOR EMERGENCY BREAKAWAY FITTINGS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 646 | STANDARD FOR EXHAUST HOODS AND RELATED CONTROLS FOR COMMERCIAL AND INSTITUTIONAL COOKING EQUIPMENT |
| 647 | Standard for Unvented Kerosene-Fired Room Heaters and Portable Heaters |
| 647A | Outline of Investigation for Synthetic Fuels for Listed Kerosene-Fired Portable Heaters and Kerosene-Fired Room Heaters |
| 651 | Standard for Schedule 40, 80, Type EB and A Rigid PVC Conduit and Fittings |
| 651 | STANDARD FOR EMERGENCY VALVES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 651A | Schedule 40 and 80 High Density Polyethylene (HDPE) Conduit |
| 652 | STANDARD FOR TANK ASSEMBLIES FOR THE COLLECTION, STORAGE AND REMOVAL OF USED OIL |
| 653 | STANDARD FOR ABOVEGROUND HORIZONTAL STEEL CONTAINED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 655 | STANDARD FOR ABOVEGROUND PROTECTED TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 656 | STANDARD FOR OIL-WATER SEPARATORS |
| 661 | STANDARD FOR OVERFILL PROTECTION DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID STORAGE TANKS |
| 663 | STANDARD FOR SPILL CONTAINMENT DEVICES FOR FLAMMABLE AND COMBUSTIBLE LIQUID ABOVEGROUND STORAGE TANKS |
| 664 | STANDARD FOR CONTAINMENT SUMPS, SUMP FITTINGS, AND ACCESSORIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 667 | METALLIC UNDERGROUND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 668 | Standard for Hose Valves for Fire-Protection Service |
| 668 | STANDARD FOR LINERS USED FOR SECONDARY CONTAINMENT OF ABOVEGROUND FLAMMABLE AND COMBUSTIBLE LIQUID TANKS |
| 669 | STANDARD FOR INTERNAL RETROFIT SYSTEMS FOR UNDERGROUND TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 670 | STANDARD FOR ABOVEGROUND NONMETALLIC TANKS FOR FUEL OIL AND OTHER COMBUSTIBLE LIQUIDS |
| 674 | Electric Motors and Generators for Use in Hazardous (Classified) Locations |
| 674 | STANDARD FOR UNVENTED ALCOHOL FUEL BURNING DECORATIVE APPLIANCES |
| 675.1 | STANDARD FOR VOLUMETRIC LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 675.2 | STANDARD FOR NONVOLUMETRIC PRECISION LEAK DETECTION DEVICES FOR UNDERGROUND AND ABOVEGROUND STORAGE TANKS AND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 676 | Standard for Underwater Luminaires and Submersible Junction Boxes |
| 676 | STANDARD FOR REFURBISHING OF STORAGE TANKS FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 676A | Outline of Investigation for Potting Compounds for Swimming Pool, Fountain, and Spa Equipment |
| 677 | STANDARD FOR FIRE TESTED ABOVEGROUND TANK ASSEMBLIES FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 679 | STANDARD FOR METALLIC AND NONMETALLIC UNDERGROUND PIPING FOR FLAMMABLE AND COMBUSTIBLE LIQUIDS |
| 680 | Standard for Emergency Vault Ventilators and Vault-Ventilating Ports |
| 681 | Standard for Installation and Classification of Burglar and Holdup Alarm Systems |
| 687 | Standard for Burglary-Resistant Safes |
| 693 | Outline of Investigation for Excess Pressure Pumps for Wet Pipe Sprinkler Systems |
| 696 | Standard for Electric Toys |
| 697 | Standard for Toy Transformers |
| 698A | Standard for Industrial Control Panels Relating to Hazardous (Classified) Locations |
| 701 | STANDARD FOR THERMAL INSULATION, POLYSTYRENE, BOARDS AND PIPE COVERING |
| 701.1 | STANDARD FOR THERMAL INSULATION, POLYSTYRENE BOARDS |
| 702.1 | STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 1: MATERIAL SPECIFICATION |
| 702.2 | STANDARD FOR MINERAL FIBRE THERMAL INSULATION FOR BUILDINGS, PART 2: INSTALLATION |
| 703 | STANDARD FOR CELLULOSE FIBRE INSULATION FOR BUILDINGS |
| 704.1 | STANDARD FOR THERMAL INSULATION, POLYURETHANE AND POLYISOCYANURATE, BOARDS, FACED |
| 705 | Standard for Safety for Power Ventilators |
| 706.1 | STANDARD FOR WOOD FIBRE INSULATING BOARDS FOR BUILDINGS |
| 710 | Standard for Exhaust Hoods for Commercial Cooking Equipment |
| 710.1 | STANDARD FOR THERMAL INSULATION - BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION |
| 710.2 | STANDARD FOR THERMAL INSULATION - BEAD-APPLIED ONE COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 2: INSTALLATION |
| 710A | Standard for Rooftop Grease and Oil Collection and Containment Systems |
| 710B | Standard for Recirculating Systems |
| 710C | Outline of Investigation for Ultraviolet Radiation Systems for Use in the Ventilation Control of Commercial Cooking Operations |
| 711 | Rating and Fire Testing of Fire Extinguishers |
| 711.1 | STANDARD FOR THERMAL INSULATION - BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 1: MATERIAL SPECIFICATION |
| 711.2 | STANDARD FOR THERMAL INSULATION - BEAD-APPLIED TWO COMPONENT POLYURETHANE AIR SEALANT FOAM, PART 2: INSTALLATION |
| 711A | Outline of Investigation for the Fire Test Method for Portable Hand-Held Extinguishers Intended for Use On Residential Cooking Equipment |
| 712.1 | STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION |
| 712.1 | STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - MATERIAL SPECIFICATION |
| 712.2 | STANDARD FOR THERMAL INSULATION - LIGHT DENSITY, OPEN CELL SPRAY APPLIED SEMI-RIGID POLYURETHANE FOAM - INSTALLATION |
| 716.1 | STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - MATERIALS AND SYSTEMS |
| 716.2 | STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - INSTALLATION OF EIFS COMPONENTS AND WATER RESISTIVE BARRIER |
| 716.3 | STANDARD FOR EXTERIOR INSULATION AND FINISH SYSTEMS (EIFS) - DESIGN APPLICATION |
| 717.1 | STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS - MATERIAL PROPERTIES |
| 717.1 | STANDARD FOR FLAT WALL INSULATING CONCRETE FORM (ICF) UNITS |
| 718 | STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY APPLIED POLYURETHANE FOAM |
| 718 | STANDARD FOR SITE QUALITY ASSURANCE PROGRAM FOR SPRAY POLYURETHANE FOAM |
| 719 | Standard for Nonmetallic-Sheathed Cables |
| 723 | Standard for Test for Surface Burning Characteristics of Building Materials |
| 723S | Outline of Investigation for Drop-Out Ceilings Installed Beneath Automatic Sprinklers |
| 724 | Outline of Investigation for Indirect Fired, Oil Burning Commercial Cooking Appliances |
| 726 | Standard for Oil-Fired Boiler Assemblies |
| 727 | Standard for Oil-Fired Central Furnaces |
| 729 | Standard for Oil-Fired Floor Furnaces |
| 730 | Standard for Oil-Fired Wall Furnaces |
| 731 | Standard for Oil-Fired Unit Heaters |
| 732 | Standard for Oil-Fired Storage Tank Water Heaters |
| 733 | Standard for Oil-Fired Air Heaters and Oil-Fired Direct-Fired Heaters |
| 737 | Standard for Fireplace Stoves |
| 745-1 | Portable Electric Tools |
| 745-2-31 | Particular Requirements for Diamond Core Drills |
| 745-2-32 | Particular Requirements for Magnetic Drill Presses |
| 746A | Standard for Polymeric Materials - Short Term Property Evaluations |
| 746B | Standard for Polymeric Materials - Long Term Property Evaluations |
| 746C | Standard for Polymeric Materials - Use in Electrical Equipment Evaluations |
| 746D | Standard for Polymeric Materials - Fabricated Parts |
| 746E | Standard for Polymeric Materials - Industrial Laminates, Filament Wound Tubing, Vulcanized Fibre, and Materials Used In Printed-Wiring Boards |
| 746F | Standard for Polymeric Materials - Flexible Dielectric Film Materials for Use in Printed-Wiring Boards and Flexible Materials Interconnect Constructions |
| 746H | Outline of Investigation for Non-Halogenated Materials |
| 746R | RESTRICTED USE SUBSTANCES IN POLYMERIC MATERIALS |
| 749 | Household Dishwashers |
| 749 | Household Dishwashers |
| 749 | Household Dishwashers |
| 751 | Standard for Vending Machines |
| 752 | Standard for Bullet-Resisting Equipment |
| 753 | Standard for Alarm Accessories for Automatic Water-Supply Control Valves for Fire-Protection Service |
| 756 | Standard for Coin and Currency Changers and Actuators |
| 758 | Standard for Appliance Wiring Material |
| 762 | Outline of Investigation for Power Roof Ventilators for Restaurant Exhaust Appliances |
| 763 | Standard for Motor-Operated Commercial Food Preparing Machines |
| 763 | Standard for Motor-Operated Commercial Food Preparing Machines |
| 768 | Standard for Combination Locks |
| 770 | STANDARD TEST METHOD FOR DETERMINATION OF LONG-TERM THERMAL RESISTANCE OF CLOSED-CELL THERMAL INSULATING FOAMS |
| 771 | Night Depositories |
| 771.1 | GUIDE FOR PREPARING THERMAL INSULATION STANDARDS, PART 1 - MATERIAL SPECIFICATION |
| 773 | Standard for Plug-In Locking Type Photocontrols for Use with Area Lighting |
| 773 | STANDARD FOR THERMAL INSULATION TERMINOLOGY |
| 773A | Nonindustrial Photoelectric Switches for Lighting Control |
| 774 | STANDARD LABORATORY GUIDE FOR THE DETERMINATION OF VOLATILE ORGANIC COMPOUND EMISSIONS FROM POLYURETHANE FOAM |
| 775 | Standard for Graphic Arts Equipment |
| 778 | Standard for Motor-Operated Water Pumps |
| 779 | Standard for Electrically Conductive Floorings |
| 783 | Standard for Electric Flashlights and Lanterns for Use in Hazardous (Classified) Locations |
| 789 | Standard for Indicator Posts for Fire-Protection Service |
| 790 | Standard for Standard Test Methods for Fire Tests of Roof Coverings |
| 791 | Standard for Residential Incinerators |
| 793 | Standard for Automatically Operated Roof Vents for Smoke and Heat |
| 795 | Standard for Commercial-Industrial Gas Heating Equipment |
| 796 | Standard for Printed-Wiring Boards |
| 796F | Standard for Flexible Materials Interconnect Constructions |
| 797 | Electrical Metallic Tubing - Steel |
| 797A | Standard for Electrical Metallic Tubing - Aluminum and Stainless Steel |
| 801 | STANDARD ON ELECTRIC UTILITY WORKPLACE ELECTRICAL SAFETY FOR GENERATION, TRANSMISSION, AND DISTRIBUTION |
| 810 | Standard for Capacitors |
| 810A | Standard for Electrochemical Capacitors |
| 810B | Standard for DC Power Capacitors |
| 813 | Standard for Commercial Audio Equipment |
| 814 | Gas-Tube-Sign Cable |
| 817 | Standard for Cord Sets and Power-Supply Cords |
| 823 | Standard for Electric Heaters For Use in Hazardous (Classified) Locations |
| 826 | Standard for Household Electric Clocks |
| 827 | Standard for Central-Station Alarm Services |
| 827A | Outline of Investigation for Hosted Central Station Services |
| 827B | Managed Video Services |
| 834 | Standard for Heating, Water Supply, and Power Boilers - Electric |
| 840 | Standard for Insulation Coordination Including Clearances and Creepage Distances for Electrical Equipment |
| 842 | Standard for Valves for Flammable Fluids |
| 842A | Standard for Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 842B | Standard for Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 844 | Standard for Luminaires for Use in Hazardous (Classified) Locations |
| 845 | Motor Control Centers |
| 852 | Standard for Metallic Sprinkler Pipe for Fire Protection Service |
| 854 | Standard for Service-Entrance Cables |
| 857 | Busways |
| 858 | Standard for Household Electric Ranges |
| 858A | Standard for Safety-Related Solid-State Controls for Household Electric Ranges |
| 859 | Standard for Household Electric Personal Grooming Appliances |
| 860 | Standard for Pipe Unions for Flammable and Combustible Fluids and Fire-Protection Service |
| 863 | Standard for Time-Indicating and -Recording Appliances |
| 864 | Standard for Control Units and Accessories for Fire Alarm Systems |
| 867 | Standard for Electrostatic Air Cleaners |
| 867A | Outline of Investigation for Commercial/Industrial Indoor Air Quality Systems, Ozone Generating Type |
| 869A | Reference Standard for Service Equipment |
| 870 | Standard for Wireways, Auxiliary Gutters, and Associated Fittings |
| 873 | Standard for Temperature-Indicating and -Regulating Equipment |
| 875 | Standard for Electric Dry-Bath Heaters |
| 879 | Standard for Electric Sign Components |
| 879A | Standard for LED Sign and Sign Retrofit Kits |
| 879B | Outline of Investigation for Polymeric Enclosure Systems for the Splice Between Neon Tubing Electrode Leads and GTO Cable, and the GTO Cable Leading to the Splice |
| 880 | Standard for Sustainability for Manufacturing Organizations |
| 884 | Standard for Underfloor Raceways and Fittings |
| 887 | Standard for Delayed-Action Timelocks |
| 891 | Switchboards |
| 891A | Outline of Investigation for Switchboards Rated 601 - 1000 V |
| 896 | Standard for Oil-Burning Stoves |
| 900 | Standard for Air Filter Units |
| 904Z | Guidelines for Integrating Health and Safety in the Workplace |
| 906 | Outline of Investigation for Solenoids |
| 907 | Standard for Fireplace Accessories |
| 907A | Outline of Investigation for Factory-Built Termination Caps for Use with Masonry Chimneys |
| 912 | Standard for Highway Emergency Signals |
| 913 | Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations |
| 913 | Standard for Intrinsically Safe Apparatus and Associated Apparatus for Use in Class I, II, III, Division 1, Hazardous (Classified) Locations |
| 916 | Standard for Energy Management Equipment |
| 917 | Standard for Clock-Operated Switches |
| 921 | Commercial Dishwashers |
| 921 | Commercial Dishwashers |
| 923 | Standard for Microwave Cooking Appliances |
| 924 | Standard for Emergency Lighting and Power Equipment |
| 935 | Standard for Fluorescent-Lamp Ballasts |
| 943 | Ground-Fault Circuit-Interrupters |
| 943B | Standard for Appliance Leakage-Current Interrupters |
| 943C | Outline of Investigation for Special Purpose Ground-Fault Circuit-Interrupters |
| 959 | Standard for Medium Heat Appliance Factory-Built Chimneys |
| 961 | Standard for Electric Hobby and Sports Equipment |
| 962 | Standard for Household and Commercial Furnishings |
| 962A | Standard for Furniture Power Distribution Units |
| 962B | Outline of Investigation for Merchandise Display and Rack Mounted Power Distribution Units |
| 963 | Standard for Sealing, Wrapping, and Marking Equipment |
| 964 | Standard for Electrically Heated Bedding |
| 969 | Standard for Marking and Labeling Systems |
| 971 | Standard for Nonmetallic Underground Piping For Flammable Liquids |
| 971A | Outline of Investigation for Metallic Underground Fuel Pipe |
| 972 | Standard for Burglary Resisting Glazing Material |
| 977 | Standard for Fused Power-Circuit Devices |
| 979 | Standard for Water Treatment Appliances |
| 982 | Standard for Motor-Operated Household Food Preparing Machines |
| 982 | Standard for Motor-Operated Household Food Preparing Machines |
| 984A | Outline of Investigation for Compatibility of Insulating Materials and Refrigerant/Oil for Use in Hermetic Refrigerant Motor-Compressors |
| 985 | Standard for Household Fire Warning System Units |
| 987 | Standard for Stationary and Fixed Electric Tools |
| 991 | Standard for Tests for Safety-Related Controls Employing Solid-State Devices |
| 998 | Humidifiers |
| 1001 | STANDARD FOR INTEGRATED SYSTEMS TESTING OF FIRE PROTECTION AND LIFE SAFETY SYSTEMS |
| 1004-1 | Standard for Rotating Electrical Machines - General Requirements |
| 1004-2 | Standard for Impedance Protected Motors |
| 1004-3 | Standard for Thermally Protected Motors |
| 1004-4 | Standard for Electric Generators |
| 1004-5 | Standard for Fire Pump Motors |
| 1004-6 | Standard for Servo and Stepper Motors |
| 1004-7 | Standard for Electronically Protected Motors |
| 1004-8 | Standard for Inverter Duty Motors |
| 1004-9 | Standard for Form Wound and Medium Voltage Rotating Electrical Machines |
| 1004-10 | Outline of Investigation for Pool Pump Motors |
| 1008 | Transfer Switch Equipment |
| 1008A | Transfer Switch Equipment, Over 1000 Volts |
| 1008M | Transfer Switch Equipment, Meter Mounted |
| 1008S | Standard for Solid-State Transfer Switches |
| 1012 | Standard for Power Units Other Than Class 2 |
| 1017 | Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines |
| 1017 | Vacuum Cleaners, Blower Cleaners, and Household Floor Finishing Machines |
| 1018 | Standard for Electric Aquarium Equipment |
| 1022 | Standard for Line Isolation Monitors |
| 1023 | Standard for Household Burglar-Alarm System Units |
| 1026 | Standard for Household Electric Cooking and Food Serving Appliances |
| 1029 | Standard for High-Intensity-Discharge Lamp Ballasts |
| 1029A | Outline of Investigation for Ignitors and Related Auxiliaries for HID Lamp Ballasts |
| 1030 | Standard for Sheathed Heating Elements |
| 1034 | Standard for Burglary-Resistant Electric Locking Mechanisms |
| 1037 | Standard for Antitheft Alarms and Devices |
| 1037B | Outline of Investigation for Security Latch Devices |
| 1040 | Standard for Fire Test of Insulated Wall Construction |
| 1042 | Standard for Electric Baseboard Heating Equipment |
| 1046 | Standard for Grease Filters for Exhaust Ducts |
| 1047 | Standard for Isolated Power Systems Equipment |
| 1053 | Standard for Ground-Fault Sensing and Relaying Equipment |
| 1058 | Standard for Halogenated Agent Extinguishing System Units |
| 1059 | Standard for Terminal Blocks |
| 1062 | Standard for Unit Substations |
| 1063 | Standard for Machine-Tool Wires and Cables |
| 1066 | Standard for Low-Voltage AC and DC Power Circuit Breakers Used in Enclosures |
| 1066A | Outline of Investigation for US Naval Commercial Off The Shelf (COTS) Designated Three-Pole Low-Voltage AC Power Circuit Breakers, Drawout-Mounted Type, And Accessories/Functional Components For Use On Non-Nuclear Naval Combatant Ships |
| 1067 | Standard for Electrically Conductive Equipment and Materials for Use in Flammable Anesthetizing Locations |
| 1069 | Standard for Hospital Signaling and Nurse Call Equipment |
| 1072 | Standard for Medium-Voltage Power Cables |
| 1076 | Standard for Proprietary Burglar Alarm Units and Systems |
| 1077 | Standard for Supplementary Protectors for Use in Electrical Equipment |
| 1077A | Outline of Investigation for Automatically Resettable Supplementary Protectors |
| 1081 | Standard for Swimming Pool Pumps, Filters, and Chlorinators |
| 1082 | Standard for Household Electric Coffee Makers and Brewing-Type Appliances |
| 1083 | Household Electric Skillets and Frying-Type Appliances |
| 1086 | Standard for Household Trash Compactors |
| 1088 | Temporary Lighting Strings |
| 1088 | Standard for Temporary Lighting Strings |
| 1090 | Standard for Electric Snow Movers |
| 1091 | Standard for Butterfly Valves for Fire-Protection Service |
| 1091A | Outline of Investigation for Butterfly Valve Indicator Posts for Fire Protection Service |
| 1091B | Outline of Investigation for System Control Ball Valves for Fire Protection Service |
| 1097 | Double Insulation Systems for Use in Electrical Equipment |
| 1100 | Standard for Alcohol and Kerosene Cooking Appliances for Marine Use |
| 1101 | Standard for Solidified Fuel Cooking Appliances for Marine Use |
| 1102 | Standard for Nonintegral Marine Fuel Tanks |
| 1104 | Standard for Marine Navigation Lights |
| 1105 | Standard for Marine Use Filters, Strainers, and Separators |
| 1106 | Standard for Marine Manually Operated Shutoff Valves for Flammable Liquids |
| 1107 | Outline of Investigation for Electric Power Switches |
| 1110 | Standard for Marine Combustible Gas Indicators |
| 1112 | Standard for Marine Electric Motors and Generators (Cranking, Outdrive Tilt, Trim Tab, Generators, Alternators) |
| 1113 | Standard for Electrically Operated Pumps for Nonflammable Liquids, Marine |
| 1120 | Standard for Marine Engine Ignition Systems and Components |
| 1121 | Standard for Marine Through-Hull Fittings and Sea-Valves |
| 1123 | Standard for Marine Buoyant Devices |
| 1128 | Standard for Marine Blowers |
| 1129 | Standard for Wet Exhaust Components for Marine Engines |
| 1130 | Standard for Mechanically and Electrically Operated Fuel Pumps for Marine Use |
| 1136 | Outline of Investigation for Marine Rigid and Flexible Air Ducting |
| 1149 | Standard for Low Voltage Marine Lighting Fixtures |
| 1168 | Standard for Recreational Boats |
| 1175 | Standard for Buoyant Cushions |
| 1177 | Standard for Buoyant Vests |
| 1180 | Standard for Fully Inflatable Recreational Personal Flotation Devices |
| 1191 | Standard for Components for Personal Flotation Devices |
| 1193 | Standard for Marine Filters and Strainers for Nonflammable Liquids |
| 1196 | Standard for Floating Waterlights |
| 1197 | Standard for Immersion Suits |
| 1199 | Standard for Recreational Boats Less Than 20 Feet in Length |
| 1201 | Standard for Sensor Operated Backwater Prevention Systems |
| 1203 | Standard for Explosion-Proof and Dust-Ignition-Proof Electrical Equipment for Use in Hazardous (Classified) Locations |
| 1204 | Standard for Parts Cleaners |
| 1206 | Standard for Electric Commercial Clothes-Washing Equipment |
| 1230 | Standard for Amateur Movie Lights |
| 1236 | Standard for Battery Chargers for Charging Engine-Starter Batteries |
| 1238 | Standard for Control Equipment for Use with Flammable Liquid Dispensing Devices |
| 1238A | Outline of Investigation for Battery Operated Hose Nozzle Valve Readers |
| 1240 | Standard for Electric Commercial Clothes-Drying Equipment |
| 1241 | Standard for Junction Boxes for Swimming Pool Luminaires |
| 1242 | Standard for Electrical Intermediate Metal Conduit - Steel |
| 1247 | Standard for Diesel Engines for Driving Stationary Fire Pumps |
| 1247A | OUTLINE OF INVESTIGATION FOR VARIABLE SPEED LIMITING CONTROLS INSTALLED WITH DIESEL ENGINES FOR DRIVING STATIONARY FIRE PUMPS |
| 1248 | Standard for Engine-Generator Assemblies for Use in Recreational Vehicles |
| 1254 | Standard for Pre-Engineered Dry and Wet Chemical Extinguishing System Units |
| 1254E | Outline of Investigation for Dry Chemical Extinguishing System Units, Engineered Type |
| 1254F | Outline of Investigation for Rubber-Gasketed Fittings and Metallic Pipe for Commercial Cooking Equipment Protection Extinguishing System Units |
| 1254H | Outline of Investigation for Stationary and Semi-Portable Hand Hose Line Dry Chemical Extinguishing System Units |
| 1256 | Standard for Fire Test of Roof Deck Constructions |
| 1261 | Standard for Electric Water Heaters for Pools and Tubs |
| 1263 | Outline of Investigation for Irrigation Cables |
| 1275 | Standard for Flammable Liquid Storage Cabinets |
| 1276 | Outline of Investigation for Welding Cable |
| 1277 | Standard for Electrical Power and Control Tray Cables with Optional Optical-Fiber Members |
| 1278 | Standard for Movable and Wall- or Ceiling-Hung Electric Room Heaters |
| 1279 | Outline of Investigation for Solar Collectors |
| 1283 | Standard for Electromagnetic Interference Filters |
| 1285 | Standard for Pipe and Couplings, Polyvinyl Chloride (PVC), and Oriented Polyvinyl Chloride (PVCO) for Underground Fire Service |
| 1286 | Standard for Office Furnishings |
| 1294 | Outline of Investigation for Composite Panels |
| 1296 | Standard for Shear Resistance Tests for Ceiling Boards for Manufactured Homes |
| 1298 | Standard for Roof Trusses for Manufactured Homes |
| 1309 | Standard for Marine Shipboard Cable |
| 1310 | Standard for Class 2 Power Units |
| 1313 | Standard for Nonmetallic Safety Cans for Petroleum Products |
| 1314 | Standard for Special-Purpose Metal Containers |
| 1315 | Standard for Metal Waste Paper Containers |
| 1316 | Standard for Fibre Reinforced Underground Tanks for Flammable and Combustible Liquids |
| 1321 | Outline of Investigation for Polytetrafluoroethylene Plastic Seal Materials |
| 1322 | Standard for Fabricated Scaffold Planks and Stages |
| 1323 | Standard for Scaffold Hoists |
| 1331 | Standard for Station Inlets and Outlets |
| 1332 | Standard for Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment |
| 1336 | Outline of Investigation for Exit Doors |
| 1337 | Outline of Investigation for LP-Gas, Natural Gas, and Manufactured Gas Devices for Engine Fuel Systems |
| 1340 | Standard for Hoists |
| 1349 | Outline of Investigation for LP-Gas Vaporizers |
| 1349 | GUIDE FOR THE INVESTIGATION OF LP-GAS VAPORIZERS |
| 1351 | Outline of Investigation for Hose Reels |
| 1356 | Outline of Investigation for Pipe Joint Sealing Compounds |
| 1357 | Outline of Investigation for Oxygen-Fuel Gas Flash Arrester and Combination Flash Arrester and Back-Pressure Check Valves |
| 1358 | Outline of Investigation for Compressed Gas Check Valves and Hose Couplers |
| 1362 | Outline of Investigation for Gas Boosters |
| 1363 | Standard for Relocatable Power Taps |
| 1363A | Outline of Investigation for Special Purpose Relocatable Power Taps |
| 1365 | Outline of Investigation for Corrugated Medical Tubing (CMT) Systems |
| 1366 | Outline of Investigation for Insulated Bus Pipe |
| 1368 | Outline of Investigation for Restricted Use Substances in Metallic Components |
| 1369 | Standard for Aboveground Piping for Flammable and Combustible Liquids |
| 1370 | Standard for Unvented Alcohol Fuel Burning Decorative Appliances |
| 1371 | Outline of Investigation for Pump Cable Submersed in Diesel Exhaust Fluid (DEF) |
| 1374 | Outline of Investigation for Fire Tests of Balcony Assemblies |
| 1377 | Outline of Investigation for Wire Used in Low Voltage Seasonal Lighting Products In Circuits With a Maximum Available Power of 15W |
| 1381 | Outline of Investigation for Aerosol Duct Sealant |
| 1382 | Outline of Investigation for Sheet Metal Air Ducts with Sealed Joints |
| 1384 | Standard for Water-Based Automatic Extinguisher Units |
| 1385 | Outline of Investigation for Cryogenic Submersible Pump Cable |
| 1389 | Standard for Plant Oil Extraction Equipment for Installation and Use in Ordinary (Unclassified) Locations and Hazardous (Classified) Locations |
| 1411 | Standard for Transformers and Motor Transformers for Use in Audio-, Radio-, and Television-Type Appliances |
| 1412 | Standard for Fusing Resistors and Temperature-Limited Resistors for Radio- and Television- Type Appliances |
| 1413 | Standard for High-Voltage Components for Television-Type Appliances |
| 1416 | Standard for Overcurrent and Overtemperature Protectors for Radio- and Television- Type Appliances |
| 1417 | Standard for Special Fuses for Radio- and Television- Type Appliances |
| 1419 | Standard for Professional Video and Audio Equipment |
| 1424 | Standard for Cables for Power-Limited Fire-Alarm Circuits |
| 1425 | Standard for Cables for Non-Power-Limited Fire-Alarm Circuits |
| 1426 | Standard for Electrical Cables for Boats |
| 1429 | Standard for Pullout Switches |
| 1431 | Standard for Personal Hygiene and Health Care Appliances |
| 1434 | Standard for Thermistor-Type Devices |
| 1436 | Standard for Outlet Circuit Testers and Similar Indicating Devices |
| 1437 | Standard for Electrical Analog Instruments - Panel Board Types |
| 1439 | Standard for Tests for Sharpness of Edges on Equipment |
| 1441 | Coated electrical sleeving |
| 1446 | Standard for Systems of Insulating Materials - General |
| 1446 | Standard for Systems of Insulating Materials - General |
| 1446A | Outline of Investigation for Dry Type Transformer Insulation Systems Rated Above 600V |
| 1446A | Outline of Investigation for Dry Type Transformer Insulation Systems Rated Above 1 kV |
| 1447 | Standard for Electric Lawn Mowers |
| 1449 | Standard for Surge Protective Devices |
| 1449A | Outline of Investigation for Electric Vehicle (EV) Surge Protective Devices |
| 1450 | Standard for Motor-Operated Air Compressors, Vacuum Pumps, and Painting Equipment |
| 1453 | Standard for Electric Booster and Commercial Storage Tank Water Heaters |
| 1462 | Outline of Investigation for Mobile Home Pipe Heating Cable |
| 1468 | Standard for Direct Acting Pressure Reducing and Pressure Restricting Valves |
| 1469 | Standard for Strength of Body and Hydraulic Pressure Loss Testing of Backflow Special Check Valves |
| 1472 | Solid-State Dimming Controls |
| 1474 | Standard for Adjustable Drop Nipples for Sprinkler Systems |
| 1477 | Outline of Investigation for Compressed Gas Shutoff Valves |
| 1478 | Standard for Fire Pump Relief Valves |
| 1478A | Standard for Pressure Relief Valves for Sprinkler Systems |
| 1479 | Standard for Fire Tests of Penetration Firestops |
| 1480 | Speakers for Fire Alarm and Signaling Systems, Including Accessories |
| 1480A | Standard for Speakers for Commercial and Professional Use |
| 1481 | Standard for Power Supplies for Fire-Protective Signaling Systems |
| 1482 | Standard for Solid-Fuel Type Room Heaters |
| 1484 | Standard for Residential Gas Detectors |
| 1486 | Standard for Quick Opening Devices for Dry Pipe Valves for Fire Protection Service |
| 1488 | Outline of Investigation for Seasonal Use Modular Trees |
| 1489 | Standard for Fire Tests of Fire Resistant Pipe Protection Systems Carrying Combustible Liquids |
| 1492 | Audio-Video Products and Accessories |
| 1493 | Outline of Investigation for Underground Low-Energy Circuit Cable |
| 1500 | Standard for Ignition-Protection Test for Marine Products |
| 1517 | Standard for Hybrid Personal Flotation Devices |
| 1551 | Outline of Investigation for Sprinkler Systems Wire |
| 1557 | Standard for Electrically Isolated Semiconductor Devices |
| 1558 | Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear |
| 1559 | Standard for Insect-Control Equipment - Electrocution Type |
| 1561 | Standard for Dry-Type General Purpose and Power Transformers |
| 1562 | Standard for Transformers, Distribution, Dry-Type - Over 600 Volts |
| 1563 | Standard for Electric Spas, Equipment Assemblies, and Associated Equipment |
| 1564 | Standard for Industrial Battery Chargers |
| 1565 | Positioning Devices |
| 1567 | Standard for Receptacles and Switches Intended for Use with Aluminum Wire |
| 1569 | Metal-Clad Cables |
| 1573 | Standard for Stage and Studio Luminaires and Connector Strips |
| 1574 | Standard for Track Lighting Systems |
| 1576 | Standard for Flashlights and Lanterns |
| 1577 | Standard for Optical Isolators |
| 1581 | Reference Standard for Electrical Wires, Cables, and Flexible Cords |
| 1588 | Outline of Investigation for Roof and Gutter De-Icing Cable Units |
| 1594 | Standard for Sewing and Cutting Machines |
| 1598 | Luminaires |
| 1598A | Standard for Supplemental Requirements for Luminaires for Installation on Marine Vessels |
| 1598B | Standard for Supplemental Requirements for Luminaire Reflector Kits for Installation on Previously Installed Fluorescent Luminaires |
| 1598C | Standard for Light-Emitting Diode (LED) Retrofit Luminaire Conversion Kits |
| 1602 | Standard for Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and Edger-Trimmers |
| 1610 | Standard for Central-Station Burglar-Alarm Units |
| 1618 | Standard for Wall Protectors, Floor Protectors, and Hearth Extensions |
| 1626 | Standard for Residential Sprinklers for Fire-Protection Service |
| 1630 | Outline of Investigation for Residential Hose Cabinets |
| 1635 | Standard for Digital Alarm Communicator System Units |
| 1637 | Standard for Home Health Care Signaling Equipment |
| 1638 | Visible Signaling Devices for Fire Alarm and Signaling Systems, Including Accessories |
| 1638A | Standard for Visual Signal Appliances for General Signaling Use |
| 1640 | Standard for Portable Power-Distribution Equipment |
| 1641 | Standard for Installation and Classification of Residential Burglar Alarm Systems |
| 1642 | Standard for Lithium Batteries |
| 1647 | Standard for Motor-Operated Massage and Exercise Machines |
| 1650 | Standard for Portable Power Cable |
| 1651 | Standard for Optical Fiber Cable |
| 1652 | Outline of Investigation for Flexible Metallic Tubing |
| 1653 | Electrical Nonmetallic Tubing |
| 1655 | Standard for Community-Antenna Television Cables |
| 1659 | Standard for Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords |
| 1660 | Liquid-Tight Flexible Nonmetallic Conduit |
| 1666 | Standard for Test for Flame Propagation Height of Electrical and Optical-Fiber Cables Installed Vertically in Shafts |
| 1673 | Standard for Electric Space Heating Cables |
| 1676 | Standard for Conductive-Path and Discharge-Path Resistors for Use in Radio-, Video-, or Television-Type Appliances |
| 1678 | Standard for Household, Commercial, and Institutional-Use Carts, Stands and Entertainment Centers for Use with Audio and/or Video Equipment |
| 1680 | Outline of Investigation for Stage and Lighting Cables |
| 1681 | Standard for Wiring Device Configurations |
| 1682 | Plugs, Receptacles, and Cable Connectors of the Pin and Sleeve Type |
| 1683 | Outline of Investigation for Electric Heating Products For Installation Under Floor Coverings |
| 1685 | Standard for Vertical-Tray Fire-Propagation and Smoke-Release Test for Electrical and Optical-Fiber Cables |
| 1686 | Standard for Pin and Sleeve Configurations |
| 1690 | Standard for Data-Processing Cable |
| 1691 | Single Pole Locking-Type Separable Connectors |
| 1692 | Standard for Polymeric Materials - Coil Forms |
| 1693 | Standard for Electric Radiant Heating Panels and Heating Panel Sets |
| 1694 | Standard for Tests for Flammability of Small Polymeric Component Materials |
| 1696 | Mechanical Protection Tubing (MPT) and Fittings |
| 1699 | Standard for Arc-Fault Circuit-Interrupters |
| 1699A | Outline of Investigation for Outlet Branch Circuit Arc-Fault Circuit-Interrupters |
| 1699B | Standard for Photovoltaic (PV) DC Arc-Fault Circuit Protection |
| 1703 | Standard for Flat-Plate Photovoltaic Modules and Panels |
| 1703 | FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS |
| 1703 | FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS |
| 1709 | Standard for Rapid Rise Fire Tests of Protection Materials for Structural Steel |
| 1711 | Standard for Amplifiers for Fire Protective Signaling Systems |
| 1712 | Outline of Investigation for Tests for Ampacity of Insulated Electrical Conductors Installed in the Fire Protective System |
| 1713 | Standard for Pressure Pipe and Couplings, Glass Fiber-Reinforced, for Underground Fire Service |
| 1715 | Standard for Fire Test of Interior Finish Material |
| 1724 | Outline of Investigation for Fire Tests for Electrical Circuit Protective Systems |
| 1726 | Standard for Automatic Drain Valves for Standpipe Systems |
| 1727 | Standard for Commercial Electric Personal Grooming Appliances |
| 1730 | Standard for Smoke Detector Monitors and Accessories for Individual Living Units of Multifamily Residences and Hotel/Motel Rooms |
| 1738 | Standard for Venting Systems for Gas-Burning Appliances, Categories II, III, and IV |
| 1739 | Standard for Pilot-Operated Pressure-Control Valves for Fire-Protection Service |
| 1740 | Standard for Robots and Robotic Equipment |
| 1741 | Standard for Inverters, Converters, Controllers and Interconnection System Equipment for Use With Distributed Energy Resources |
| 1746 | Standard for External Corrosion Protection Systems For Steel Underground Storage Tanks |
| 1767 | Standard for Early-Suppression Fast-Response Sprinklers |
| 1767B | Specific Application Early- Suppression Fast-Response (ESFR) Pendent Sprinklers Having A Nominal Discharge Coefficient Of 28.0 |
| 1769 | Standard for Cylinder Valves |
| 1773 | Standard for Termination Boxes |
| 1776 | Standard for High-Pressure Cleaning Machines |
| 1777 | Standard for Chimney Liners |
| 1778 | Uninterruptible Power Systems |
| 1778 | Standard for Uninterruptible Power Supply Equipment |
| 1783 | Outline of Investigation for Direct Connect Systems for Solid Fuel Burning Appliances |
| 1784 | Standard for Air Leakage Tests of Door Assemblies and Other Opening Protectives |
| 1786 | Direct Plug-In Nightlights |
| 1795 | Standard for Hydromassage Bathtubs |
| 1801 | Outline of Investigation for Power Distribution Centers for Communications Equipment |
| 1803 | Standard for Factory Follow-Up on Third Party Certified Portable Fire Extinguishers |
| 1805 | Standard for Laboratory Hoods and Cabinets |
| 1807 | Outline of Investigation for Fire-Resistant Cable Coating Materials |
| 1812 | Standard for Ducted Heat Recovery Ventilators |
| 1815 | Standard for Nonducted Heat Recovery Ventilators |
| 1820 | Standard for Fire Test of Pneumatic Tubing for Flame and Smoke Characteristics |
| 1821 | Standard for Thermoplastic Sprinkler Pipe and Fittings for Fire Protection Service |
| 1821A | Outline of Investigation for Thermoplastic Sprinkler Pipe and Fittings for Low Pressure Dry Pipe Applications |
| 1836 | Outline of Investigation for Electric Motors and Generators for Use in Class I, Division 2, Class I, Zone 2, Class II, Division 2 and Zone 22 Hazardous (Classified) Locations |
| 1836 | Outline of Investigation for Electric Motors and Generators for Use in Class I, Division 2 and Class II, Division 2 Hazardous (Classified) Locations |
| 1838 | Standard for Low Voltage Landscape Lighting Systems |
| 1839 | Standard for Automotive Battery Booster Cables |
| 1854 | Outline of Investigation for Excavation Liners for Secondary Containment of Flammable and Combustible Liquids |
| 1856 | Outline of Investigation for Underground Fuel Tank Internal Retrofit Systems |
| 1861 | Outline of Investigation for Power-Operated Chemical Pumps |
| 1863 | Standard for Communications-Circuit Accessories |
| 1876 | Standard for Isolating Signal and Feedback Transformers for Use in Electronic Equipment |
| 1887 | Standard for Fire Test of Plastic Sprinkler Pipe for Visible Flame and Smoke Characteristics |
| 1889 | Standard for Commercial Filters for Cooking Oil |
| 1897 | Standard for Uplift Tests for Roof Covering Systems |
| 1917 | Standard for Solid-State Fan Speed Controls |
| 1951 | Standard for Electric Plumbing Accessories |
| 1953 | Outline of Investigation for Power Distribution Blocks |
| 1963 | Standard for Refrigerant Recovery/Recycling Equipment |
| 1964 | Outline of Investigation for Rescue Equipment |
| 1971 | Standard for Signaling Devices for the Hearing Impaired |
| 1973 | Standard for Batteries for Use in Stationary, Vehicle Auxiliary Power and Light Electric Rail (LER) Applications |
| 1974 | Standard for Evaluation for Repurposing Batteries |
| 1975 | Standard for Fire Tests for Foamed Plastics Used for Decorative Purposes |
| 1976 | Outline of Investigation for Crimp Tools for use with Connecting Devices |
| 1977 | Standard for Component Connectors for Use in Data, Signal, Control and Power Applications |
| 1978 | Standard for Grease Ducts |
| 1981 | Standard for Central-Station Automation Systems |
| 1989 | Standard for Standby Batteries |
| 1990 | Standard for Nonmetallic Underground Conduit with Conductors |
| 1993 | Self-Ballasted Lamps and Lamp Adapters |
| 1994 | Standard for Luminous Egress Path Marking Systems |
| 1995 | Heating and Cooling Equipment |
| 1996 | Standard for Electric Duct Heaters |
| 1998 | Standard for Software in Programmable Components |
| 2003 | Outline of Investigation for LP-Gas Cylinder Assemblies |
| 2006 | Standard for Halon 1211 Recovery/Recharge Equipment |
| 2007A | Shatter Containment Of Lamps For Use In Regulated Food Establishments |
| 2007B | Outline of Investigation for Hygenic Design and Construction of Residential Food Heating and Cooking Appliances |
| 2011 | Outline of Investigation for Machinery |
| 2017 | Standard for General-Purpose Signaling Devices and Systems |
| 2021 | Standard for Fixed and Location-Dedicated Electric Room Heaters |
| 2024 | Standard for Cable Routing Assemblies and Communications Raceways |
| 2024 | STANDARD METHOD OF FIRE TESTS FOR OPTICAL FIBRE CABLE RACEWAY |
| 2029 | Outline of Investigation for Gas/Vapor-Blocked Cable Classified for Use in Class I Hazardous (Classified) Locations |
| 2034 | Standard for Single and Multiple Station Carbon Monoxide Alarms |
| 2039 | Flexbile Connector Piping for Fuels |
| 2040 | Standard for Folding Rollaway Tables |
| 2043 | Standard for Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces |
| 2044 | Standard for Commercial Closed-Circuit Television Equipment |
| 2049 | Outline of Investigation for Residential Pipe Heating Cable |
| 2050 | Standard for National Industrial Security Systems |
| 2054 | Standard for Household and Commercial Batteries |
| 2056 | Outline of Investigation for Safety of Power Banks |
| 2058 | Outline of Investigation for High-Security Electronic Locks |
| 2061 | Standard for Adapters and Cylinder Connection Devices for Portable LP-Gas Cylinder Assemblies |
| 2062 | Outline of Investigation for Enclosures for Use in Hazardous (Classified) Locations |
| 2069 | Outline of Investigation for Battery Holders |
| 2075 | Standard for Gas and Vapor Detectors and Sensors |
| 2075A | Outline of Investigation for CO Gas Test Kit for Gas and Vapor Detectors and Sensors |
| 2079 | Standard for Tests for Fire Resistance of Building Joint Systems |
| 2080 | Standard for Fire Resistant Tanks for Flammable and Combustible Liquids |
| 2085 | Standard for Protected Aboveground Tanks for Flammable and Combustible Liquids |
| 2089 | Standard for Vehicle Battery Adapters |
| 2096 | Standard for Commercial/Industrial Gas and/or Oil-Burning Assemblies With Emission Reduction Equipment |
| 2097 | Reference Standard for Double Insulation Systems for Use in Electronic Equipment |
| 2106 | Standard for Field Erected Boiler Assemblies |
| 2108 | Standard for Low Voltage Lighting Systems |
| 2111 | Standard for Overheating Protection for Motors |
| 2112 | Outline of Investigation for Venting Systems for Use with Gas-Fired Direct Vent Appliances |
| 2115 | Standard for Processed Solid-Fuel Firelogs and Firestarters |
| 2119 | Outline of Investigation for Protective Shielding Guards for Plumbing |
| 2127 | Standard for Inert Gas Clean Agent Extinguishing System Units |
| 2129 | Halocarbon Clean Agent Fire Extinguishers |
| 2133 | Outline of Investigation for Compressed Gas Cylinder Safety Caps |
| 2152 | Outline of Investigation for Special Purpose Nonmetallic Containers and Tanks for Specific Combustible or Noncombustible Liquids |
| 2156 | Outline of Investigation for Rubber Hose for Radiant Heating |
| 2157 | Electric Clothes Washing Machines and Extractors |
| 2157 | Electric Clothes Washing Machines and Extractors |
| 2158 | Electric Clothes Dryers |
| 2158 | Electric Clothes Dryers |
| 2158A | Standard for Clothes Dryer Transition Duct |
| 2161 | Standard for Neon Transformers and Power Supplies |
| 2162 | Standard for Commercial Wood-Fired Baking Ovens - Refractory Type |
| 2162 | COMMERCIAL WOOD-FIRED BAKING OVENS - REFRACTORY TYPE |
| 2166 | Standard for Halocarbon Clean Agent Extinguishing System Units |
| 2166P | Outline of Investigation for Plastic Pipe and Fitting Assemblies used as Self-Contained Automatic Extinguisher Units for Total Flooding Applications |
| 2167 | Standard for Water Mist Nozzles for Fire Protection Service |
| 2178 | Outline of Investigation for Marking and Coding Equipment |
| 2182 | Standard for Refrigerants |
| 2191 | Outline of Investigation for Commercial Butane-Fueled Portable Cook Stoves |
| 2196 | Standard for Fire Test for Circuit Integrity of Fire-Resistive Power, Instrumentation, Control, and Data Cables |
| 2200 | Standard for Stationary Engine Generator Assemblies |
| 2200A | Outline of Investigation for Fire Containment Testing of Stationary Engine Generator Enclosures |
| 2201 | Standard for Carbon Monoxide (CO) Emission Rate of Portable Generators |
| 2202 | Standard for Electric Vehicle (EV) Charging System Equipment |
| 2208 | Standard for Solvent Distillation Units |
| 2215 | Outline of Investigation for Oil/Water Separators |
| 2215 | Outline of Investigation for Oil/Water Separators |
| 2218 | Standard for Impact Resistance of Prepared Roof Covering Materials |
| 2218A | Standard for Impact Resistance of Roofing Systems |
| 2221 | Standard for Tests of Fire Resistive Grease Duct Enclosure Assemblies |
| 2225 | Standard for Cables and Cable-Fittings For Use In Hazardous (Classified) Locations |
| 2227 | Standard for Overfilling Prevention Devices |
| Jan-31 | Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: General Requirements |
| Feb-31 | Standard for Safety for Personnel Protection Systems for Electric Vehicle (EV) Supply Circuits: Particular Requirements for Protection Devices for Use in Charging Systems |
| 2237 | Standard for Multi-Point Interconnection Power Cable Assemblies for Industrial Machinery |
| 2238 | Standard for Cable Assemblies and Fittings for Industrial Control and Signal Distribution |
| 2239 | Hardware for the Support of Conduit, Tubing, and Cable |
| 2245 | Standard for Below-Grade Vaults for Flammable Liquid Storage Tanks |
| 2249 | Outline of Investigation for Hydrogen Fuel Dispensing Systems |
| 2250 | Standard for Instrumentation Tray Cable |
| 2251 | Standard for Plugs, Receptacles, and Couplers for Electric Vehicles |
| 2255 | Standard for Receptacle Closures |
| 2256 | Outline of Investigation for Nonmetallic Sheathed Cable Interconnects |
| 2257 | Outline of Investigation for Identification Tests for Jacket and Insulation Materials Used in Plenum Cables |
| 2258 | Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids |
| 2258 | Standard for Aboveground Nonmetallic Tanks for Fuel Oil and Other Combustible Liquids |
| 2261 | Outline of Investigation for Cables For Network-Powered Broadband Communications Systems |
| 2262 | Outline of Investigation for Fuel Cell Modules for Use in Portable and Stationary Equipment |
| 2262A | Outline of Investigation for Borohydride Fuel Cartridges with Integral Fuel Processing for Use with Portable Fuel Cell Power Systems or Similar Equipment |
| 2264B | Outline of Investigation for Hydrogen Generators Using Water Reaction |
| 2264D | Outline of Investigation for Portable Water Electrolysis Type Hydrogen Generators |
| 2265A | Outline of Investigation for Micro Fuel Cell Power Systems Using Direct Methanol Fuel Cell Technology |
| 2265C | Outline of Investigation for Hand-Held or Hand-Transportable Alkaline (Direct Borohydride) Fuel Cell Power Units And Borohydride Fuel Cartridges For Use With Consumer Electronics or Information Technology Equipment |
| 2267 | Standard for Fuel Cell Power Systems for Installation in Industrial Electric Trucks |
| 2269 | Outline of Investigation for Optical Fiber/Communications/Signaling/Coaxial Cable Outlet Boxes |
| 2271 | Standard for Batteries for Use In Light Electric Vehicle (LEV) Applications |
| 2272 | Standard for Electrical Systems for Personal E-Mobility Devices |
| 2273 | Outline of Investigation for Festoon Cable |
| 2276 | Outline of Investigation for Recreational Vehicle Cable |
| 2277 | FLEXIBLE MOTOR SUPPLY CABLE AND WIND TURBINE TRAY CABLE |
| 2277 | Outline of Investigation for Flexible Motor Supply Cable and Wind Turbine Tray Cable |
| 2282 | Environmental Claim Validation Procedure (ECVP) for Resistance to Bacterial Growth |
| 2283 | Environmental Claim Validation Procedure (ECVP) for Resistance to Fungal Growth |
| 2305 | Standard for Exhibition Display Units, Fabrication and Installation |
| 2321 | Outline of Investigation for Plate Warmers |
| 2329 | Outline of Investigation for Personnel Electrostatic Control Devices |
| 2333 | Standard for Infrared Thermometers |
| 2335 | Standard for Fire Tests of Storage Pallets |
| 2339 | Outline of Investigation for Mobile and Modular Stages |
| 2344 | Standard for Material Lifts |
| 2351 | Standard for Spray Nozzles for Fire-Protection Service |
| 2351A | Outline of Investigation for Nozzle Adaptors with Integral Filter for Fire Protection Service |
| 2353 | Standard for Safety for Single- and Multi-Layer Insulated Winding Wire |
| 2358 | Outline of Investigation for Fire Tests of Pre-Lit Artificial Seasonal Use Trees and Other Seasonal Decorative Items |
| 2360 | Standard for Test Methods for Determining the Combustibility Characteristics of Plastics Used in Semi-Conductor Tool Construction |
| 2361 | Outline of Investigation for Custom-Built Kiosks |
| 2365 | Outline of Investigation for Laundry Equipment Accessories |
| 2367 | Standard for Solid State Overcurrent Protectors |
| 2368 | Standard for Fire Exposure Testing of Rigid Nonmetallic and Composite Nonmetallic Intermediate Bulk Containers for Combustible Liquids |
| 2375 | Hip And Ridge Shingles |
| 2388 | Standard for Flexible Lighting Products |
| 2389 | Outline of Investigation for Coaxial Fault Protectors for Network-Powered Broadband Communications Systems |
| 2391 | Outline of Investigation for Equipment with Remote Feeding Telecommunication Circuits Intended for Backwards Compatibility in Legacy Telecommunication Equipment |
| 2395 | Standard for Adhesives for Use in Heating and Cooling Appliances to Secure Thermal Insulation |
| 2399 | Outline of Investigation for Metal Venting Systems for Household Clothes Dryers |
| 2416 | Standard for Audio/Video, Information and Communication Technology Equipment Cabinet, Enclosure and Rack Systems |
| 2419 | Outline of Investigation for Electrically Conductive Corrosion Resistant Compounds |
| 2420 | Belowground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| 2422 | Outline of Investigation for Ultroviolet Curing Equipment for Commercial Use |
| 2424 | Outline of Investigation for Cable Marked 'Limited Combustible' |
| 2431 | Standard for Safety for Durability of Fire Resistive Coatings and Materials |
| 2432 | Outline of Investigation for Dry System Water Delivery Time Calculation Programs |
| 2436 | Outline of Investigation for Spill Containment for Stationary Lead Acid Battery Systems |
| 2438 | Standard for Outdoor Seasonal-Use Cord-Connected Wiring Devices |
| 2441 | Outline of Investigation for Component - Connector Housings |
| 2442 | Standard for Wall- and Ceiling-Mounts and Accessories |
| 2443 | Standard for Flexible Sprinkler Hose with Fittings for Fire Protection Service |
| 2446 | Outline of Investigation for Unitary Boiler Room Systems |
| 2447 | Outline of Investigation for Containment Sumps, Fittings and Accessories for Fuels |
| 2452 | Outline of Investigation for Electric Swimming Pool and Spa Cover Operators |
| 2459 | Insulated Multi-Pole Splicing Wire Connectors |
| 2460 | Standard for Nonshielded Cable |
| 2485 | Environmental Claim Validation Procedure (ECVP) for Recyclability of Paper-Based Products |
| 2505 | Outline of Investigation for Cementitious Materials Used For Resurfacing Smoke Chamber Of Masonry Fireplaces |
| 2506 | Outline of Investigation for Refractory Panels For Masonry Fireplaces |
| 2515 | Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| 2515A | Standard for Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings |
| 2518 | Standard for Air Dispersion Systems |
| 2523 | Standard for Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, And Boilers |
| 2524 | Standard for In-building 2-Way Emergency Radio Communication Enhancement Systems |
| 2524A | Outline of Investigation for In-Building Auxiliary Radio Communication Systems |
| 2525 | Outline of Investigation for Rescue Assistance Two- Way Emergency Communication Systems for Stairwell and Elevator Landing/Lobby Areas of Refuge |
| 2556 | Wire and Cable Test Methods |
| 2557 | Outline of Investigation for Membrane Switches |
| 2560 | Standard for Emergency Call Systems for Assisted Living and Independent Living Facilities |
| 2561 | Standard for 1400 Degree Fahrenheit Factory-Built Chimneys |
| 2562 | Outline of Investigation for Pendant Cable |
| 2562 | Outline of Investigation for Pendant Cable |
| 2563 | Outline of Investigation for Heat Resistant Wire |
| 2564 | Outline of Investigation for Low-Voltage Surge Withstand Telecommunications Overcurrent Protector Components |
| 2565 | Standard for Industrial Metalworking and Woodworking Machine Tools |
| 2566 | Outline of Investigation for Part 2: Low-Voltage Surge Withstand Telecommunications Fuses |
| 2567 | Outline of Investigation for Part 3: Low-Voltage Surge Withstand Telecommunications Polymer Positive Temperature Coefficient Thermistor (PPTC) |
| 2569 | Outline of Investigation for Part 5: Low-Voltage Surge Withstand Telecommunications Line Feed Resistor (LFR) |
| 2570 | Outline of Investigation for Part 6: Low-Voltage Surge Withstand Telecommunications Electronic Current Limiters (ECL) |
| 2571 | Outline of Investigation for Irrigation Feeder, Control, and Signal Cables |
| 2572 | Standard for Mass Notification Systems |
| 2573 | Outline of Investigation for Automatic Air Release, Air/Vacuum and Combination Air Valves for Fire Protection Service |
| 2576 | Outline of Investigation for Refractory Combustion Chamber Liners |
| 2577 | Suspended Ceiling Power Grid Systems and Equipment |
| 2577 | Standard for Suspended Ceiling Power Grid Systems and Equipment |
| 2579 | Outline of Investigation for Low-Voltage Fuses - Fuses for Photovoltaic Systems |
| 2580 | Batteries for Use In Electric Vehicles |
| 2580 | STANDARD ON BATTERIES FOR USE IN ELECTRIC VEHICLES |
| 2581 | Outline of Investigation for Hydraulic Surge Suppressors for Water Based Fire Protection Systems |
| 2581A | Outline of Investigation for Expansion Chambers for Water Based Fire Protection Systems |
| 2582 | Outline of Investigation for Hip and Ridge Vents |
| 2583 | Outline of Investigation for Fuel Tank Accessories |
| 2585 | Outline of Investigation for Rebuilt Flammable Liquid Meters |
| 2586 | Standard for Hose Nozzle Valves |
| 2586A | Standard for Hose Nozzle Valves for Gasoline and Gasoline/Ethanol Blends with Nominal Ethanol Concentrations up to 85 Percent (E0 - E85) |
| 2586B | Standard for Hose Nozzle Valves for Diesel Fuel, Biodiesel Fuel, Diesel/Biodiesel Blends with Nominal Biodiesel Concentrations up to 20 Percent (B20), Kerosene, and Fuel Oil |
| 2586C | Outline of Investigation for Hose Nozzle Valves for Diesel Exhaust Fluid |
| 2591 | Outline of Investigation for Battery Cell Separators |
| 2592 | Standard for Low Voltage LED Wire |
| 2593 | Outline of Investigation for Motor Driven Turnstile Operators and Systems |
| 2594 | Standard for Electric Vehicle Supply Equipment |
| 2595 | General Requirements for Battery-Powered Appliances |
| 2600 | Standard for Relocatable Structures |
| 2600 | Standard for Relocatable Structures |
| 2610 | Standard for Commercial Premises Security Alarm Units and Systems |
| 2640 | Test Method for Server Performance |
| 2682 | Outline of Investigation for Switch-Rated Plugs and Receptacles |
| 2695 | Outline of Investigation for DC Rated Attachment Plugs and Outlet Devices Intended for Use with Information Technology and Telecommunication Equipment Installed in Restricted Access Locations |
| 2703 | Standard for Mounting Systems, Mounting Devices, Clamping/Retention Devices, and Ground Lugs for Use with Flat-Plate Photovoltaic Modules and Panels |
| 2710 | Outline of Investigation for Sustainability for Portable Electronic Products |
| 2726 | Outline of Investigation for Battery Lead Wire |
| 2727 | Outline of Investigation for Retrofit Motor Control Center Units For Use With Specified Motor Control Center Sections |
| 2728 | PELLET FUEL BURNING COOKING APPLIANCES |
| 2728 | PELLET FUEL BURNING COOKING APPLIANCES |
| 2728A | Outline of Investigation for Pellet Fuel Burning Cooking Appliances |
| 2731 | Outline of Investigation for Telecommunication Central Office Power, Battery, and Distribution Cables |
| 2733 | Outline of Investigation for Surface Vehicle On-Board Cable |
| 2734 | Outline for Connectors and Service Plugs for Use with On-Board Electrical Vehicle (EV) Charging Systems |
| 2735 | Standard for Electric Utility Meters |
| 2736 | Outline of Investigation for Single Pole Separable Interconnecting Cable Connectors for Use with Wind Turbine Generating Systems |
| 2738 | Standard for Induction Power Transmitters and Receivers for use with Low Energy Products |
| 2743 | Standard for Portable Power Packs |
| 2745 | Outline of Investigation for Meter Socket Adapters for Communications Equipment |
| 2747 | Outline of Investigation for Electric Vehicle Power Supplies |
| 2748 | Standard for Arcing Fault Quenching Equipment |
| 2748A | Standard for Arcing Fault Interrupting Devices |
| 2749 | Outline Of Investigation for Seasonal Use LED Drivers and Non-Integral LED Lighting Strings |
| 2752 | Outline of Investigation for Fabricated Stairways |
| 2753 | Outline of Investigation for Battery Operated Ride-On Lawn Mowers |
| 2755 | Outline of Investigation for Modular Data Centers |
| 2759 | Standard for Sustainability for Hard Surface Cleaners |
| 2761 | Sealants and Caulking Compounds |
| 2762 | Adhesives |
| 2763 | Sustainability for Energy Efficient Harmonic Cancellation Transformers |
| 2766 | Standard for Sustainability for Energy Efficient Heating/Cooling Systems for Building |
| 2767 | Paint and Varnish Remover |
| 2769 | Corrosion Control Products |
| 2770 | Commercial Car Wash |
| 2771 | Paper Products |
| 2773 | Pens, Mechanical Pencils, and Other Writing Instruments |
| 2775 | Standard for Fixed Condensed Aerosol Extinguishing System Units |
| 2775 | FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS |
| 2776 | Laundry Detergents and Fabric Softeners |
| 2777 | Standard for Sustainability for Hard Floor Care Products |
| 2778 | Products Made From Recycled Plastic |
| 2780 | Urinal Blocks |
| 2781 | Pool and Spa Water Treatment Products |
| 2783 | Instant Hand Antiseptic Products |
| 2784 | Standard for Sustainability for Hand Cleaners |
| 2789 | Environmental Claim Validation Procedure for Calculation of Estimated Recyclability Rate |
| 2790 | Standard for Commercial Incinerators |
| 2791 | Standard for Sustainability for Drain and/or Grease Trap Additives: Biologically-based |
| 2792 | Standard for Sustainability for Cleaning and Degreasing Compounds: Biologically-based |
| 2794 | Standard for Sustainability for Disinfectants and Disinfectant Cleaners |
| 2795 | Standard for Sustainability for Carpet and Upholstery Care Products |
| 2796 | Standard for Sustainability for Odor Control Products |
| 2797 | Standard for Sustainability for RV and/or Marine Holding Tank Additives: Biologically-based |
| 2798 | Standard for Sustainability for Biological Digestion Additives for Cleaning and Odour Control |
| 2799 | Zero Waste to Landfill |
| 2799 | Environmental Claim Validation Procedure for Zero Waste to Landfill |
| 2799A | Environmental Claim Validation Procedure (ECVP) for Zero Waste Classifications |
| Jan-00 | Standard for Medical Device Interoperability |
| 2801 | Standard for Sustainability for Printing Inks |
| 2802 | Standard for Performance Testing of Camera Image Quality |
| 2803 | Standard for Sustainability for Printing Services |
| 2804 | Environmental Claim Validation Procedure for Energy Savings Associated with the Use of a Plastic Additive |
| 2805 | Standard for Sustainability for Compostable Paper Bags |
| 2806 | Outline of Investigation for Heavy Duty Flexible Power Cable |
| 2807 | Environmental Claim Validation Procedure for PVC Free Products |
| 2808 | Outline of Investigation for Energy Monitoring Current Transformers |
| 2808 | Outline of Investigation for Energy Monitoring Current Transformers |
| 2809 | Environmental Claim Validation Procedure (ECVP) for Recycled Content |
| 2818 | GREENGUARD Certification Program For Chemical Emissions For Building Materials, Finishes And Furnishings |
| 2819 | GREENGUARD Certification Program for Chemical and Particle Emissions for Electronic Equipment |
| 2820 | GREENGUARD Certification Program for Chemical Emissions for Cleaners and Cleaning Maintenance Systems |
| 2821 | UL GREENGUARD Certification Program Method for Measuring and Evaluating Chemical Emissions From Building Materials, Finishes and Furnishings |
| 2822 | GREENGUARD Certification Program Method For Measuring And Evaluating Chemical Emissions From Cleaners And Cleaning Maintenance Systems Using Dynamic Environmental Chambers |
| 2823 | GREENGUARD Certification Program Method for Measuring and Evaluating Chemical and Particle Emissions From Electronic Equipment Using Dynamic Environmental Chambers |
| 2824 | GREENGUARD Certification Program Method For Measuring Microbial Resistance From Various Sources Using Static Environmental Chambers |
| 2825 | Outline of Investigation for Resiliency of Network Infrastructure Components |
| 2826 | Standard for Sustainability for Paperboard |
| 2829 | Standard for Sustainability for Laundry Bleach |
| 2830 | Standard for Sustainability for Septic Tank Additives: Alternative |
| 2831 | US Naval Commercial Off the Shelf (COTS) Three-Pole, Rated Maximum Voltage 4.76, 8.25, and 15kV, AC, Vacuum Circuit Breakers, Drawout Type, without Internal Overcurrent Protection, and Accessories/Components for Use on Non-Nuclear Naval Combatant Ships |
| 2839 | Environmental Claim Validation Procedure for Halogen Free Products |
| 2841 | Outline of Investigation for Sustainability for Slate Style Tablet Computers |
| 2845 | Standard for Sustainability for Personal Care Products |
| 2846 | Standard for Fire Test of Plastic Water Distribution Plumbing Pipe for Visible Flame and Smoke Characteristics |
| 2849 | Outline of Investigation for Electric Bicycles, Electrically Power Assisted Cycles (EPAC Bicycles), Electric Scooters, and Electric Motorcycles |
| 2849 | Outline of Investigation for Pedal Electric Cycles (Pedelecs) |
| 2851 | Outline of Investigation for Low-voltage Distribution Systems and Equipment for Desk and Similar Work-surface Installations |
| 2852 | Outline of Investigation for Validation Protocol for Flaming and Smoldering Polyurethane Foam |
| 2854 | Standard for Sustainability for Renewable Low-Impact Electricity Products |
| 2855 | Outline of Investigation for Folding Rollaway Tool Carts |
| 2860 | Environmental Claim Validation Procedure (ECVP) for Calculation of Recycling and Recovery Rate |
| 2861 | Environmental Claim Validation Procedure (ECVP) for Calculation of Ozone Depleting Substances (ODS) Destruction Efficiency |
| 2871 | Outline of Investigation for Electric Vehicle (EV) Service and Production Chargers |
| 2872 | Outline of Investigation for Heat Detecting Circuit Interrupters |
| 2874 | Outline of Investigation for Electric Motors for Use in Hazardous (Classified) Locations - Protection by Pressurized Atmosphere Maintained above the UFL |
| 2875 | Outline of Investigation for Modular Cable System Assemblies and Fittings for Industrial Control, Signal and Power Distribution |
| 2876 | Outline of Investigation for Remote Racking Devices for Switchgear and Controlgear |
| 2877 | Power Supplies, Medium Voltage |
| 2879 | Outline of Investigation for Nitrogen Generator Units for Use with Dry Pipe Sprinkler Systems |
| 2880 | Outline of Investigation for Limited-Power Wire and Cable Using Copper-Clad Aluminum Conductors |
| 2882 | Outline of Investigation for Radio Head Cable |
| 2883 | Standard for Sustainability for Disposable Wipers |
| 2884 | Environmental Claim Validation Procedure for Substance Content Claims |
| 2885 | Outline of Investigation for Acid Gas, Acidity and Conductivity of Combusted Materials and Assessment of Halogens |
| 2889 | Electrically Operated Attic Lifts |
| 2891 | Outline of Investigation for Indoor Air Quality for Building Interiors |
| Jan-00 | Standard for Software Cybersecurity for Network-Connectable Products, Part 1: General Requirements |
| 2900-02-01 | Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems |
| 2900-02-02 | Outline of Investigation for Software Cybersecurity for Network-Connectable Products, Part 2-2: Particular Requirements for Industrial Control Systems |
| 2900-02-03 | Outline of Investigation for Software Cybersecurity for Network-Connectable Products, Part 2-3: Particular Requirements for Security and Life Safety Signaling Systems |
| 2901 | Standard for Antifreeze Solutions for Use in Fire Sprinkler Systems |
| 2901A | Outline of Investigation for Corrosion Control Additives for Use in Fire Sprinkler Systems |
| 2903 | Outline of Investigation for Solar Tracker Power and Control Cable |
| 2904 | Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers |
| 2908 | Environmental Claim Validation Procedure (ECVP) for Determining Particle Removal for Non-Filter Electrical Appliances |
| 2930 | Outline of Investigation for Cord-and-Plug-Connected Health Care Facility Outlet Assemblies |
| 2932 | Outline of Investigation for Health Risk Assessment Process Requirements for Personal Care Products |
| 2949 | Estimating Energy Use of a Display |
| 2980 | Zero Ozone Depleting Substances (ODS) Manufacturing Process |
| 2984 | Standard for Management of Public Risks - Principles and Guidelines |
| 2985 | Sustainability Outline for Thermal Inslation |
| 2986 | Recommended Practice for Measuring Incident Energy Exposure |
| 2987 | Outline of Investigation for Steel Sprinkler Pipe Corrosion Indicators |
| 2988 | Outline of Investigation for Universal Hybrid Power and Signal/Control Cables |
| 2989 | Outline of Investigation for Tracer Wire |
| 2990 | By-Product Synergy |
| 2991 | Standard for Sustainability of Absorbent |
| 2992 | Environmental Claim Validation Procedure (ECVP) for Determination and Verification of Chemical Emissions from Water Activated Flameless Heat Packets |
| 2994 | Environmental Claim Validation Procedure (ECVP) for Particulate, Mold, Bacteria, and/or Allergen Filtration Efficacy for Air Filters |
| 2996 | IN-GROUND BOXES |
| 2996 | Outline of Investigation for In-Ground Boxes |
| 2997 | Environmental Claim Validation Procedure (ECVP) for Determination and Verification of Chemical and Particle Emissions from Chafing Fuel Products During Combustion |
| 2998 | Environmental Claim Validation Procedure (ECVP) for Zero Ozone Emissions from Air Cleaners |
| 3002 | Recommended Practice for Determining the Depth of Cut On a Test Probe Contacting the Spinning Blade of a Table Saw |
| 3003 | Distributed Generation Cables |
| 3004 | Outline of Investigation for Medium Voltage Junction Boxes |
| 3030 | Standard for Unmanned Aircraft Systems |
| 3036 | GREENGUARD Certification of Residential Indoor Air Quality |
| 3100 | Outline of Investigation for Automated Guided Vehicles (AGVs) |
| 3140 | Comparing Environmental Impacts of Sterilization Equipment |
| 3200 | Outline of Investigation for Performance Testing of Engine and Turbine Generators |
| 3223 | Outline of Investigation for Data Center Certification |
| 3225 | Outline of Investigation for Water Leak Detection Systems |
| 3400 | Outline of Investigation for Additive Manufacturing Facility Safety Management |
| 3456 | Outline of Investigation for Electric-Battery-Powered Carts For Commercial Use |
| 3566 | Outline of Investigation for Copper-Clad Aluminum Conductors |
| 3600 | Outline of Investigation for Measuring and Reporting Circular Economy Aspects of Products, Sites and Organizations |
| 3703 | Standard for Solar Trackers |
| 3730 | Standard for Photovoltaic Junction Boxes |
| 3801 | Outline of Investigation for Fault Limiters |
| 3992 | Outline of Investigation for Patch Cords Terminating in Eight-Position Modular Plug Connectors - Performance |
| 3992A | Outline of Investigation for Communications Cable Assemblies used in Power over Local Area Network (LAN) Cable Networks |
| 4000 | Outline of Investigation for High Speed Cables |
| 4040 | Outline of Investigation for Portable Wet-Type Dust Collectors for Collection of Combustible Metals |
| 4041 | Outline of Investigation for Outdoor Furniture |
| 4127 | Outline of Investigation for Low Voltage Battery Cable |
| 4128 | Outline of Investigation for Intercell and Intertier Connectors for Use in Electrochemical Battery System Applications |
| 4143 | Standard for Wind Turbine Generator - Life Time Extension (LTE) |
| 4200A | Standard for Safety for Products Incorporating Button or Coin Cell Batteries of Lithium Technologies |
| Jan-48 | Fuseholders - Part 1: General Requirements |
| Apr-48 | Fuseholders - Part 4: Class CC |
| May-48 | Fuseholders - Part 5: Class G |
| Jun-48 | Fuseholders - Part 6: Class H |
| Aug-48 | Fuseholders - Part 8: Class J |
| Sep-48 | Fuseholders - Part 9: Class K |
| Nov-48 | Fuseholders - Part 11: Type C (Edison Base) and Type S Plug Fuse |
| Dec-48 | Fuseholders - Part 12: Class R |
| 4248-15 | Fuseholders - Part 15: Class T |
| 4248-17 | Outline of Investigation for Fuseholders - Part 17: Class CF Fuses |
| 4248-18 | Outline of Investigation for Fuseholders - Part 18: Photovoltaic |
| 4248-19 | Fuseholders - Part 19: Photovoltaic Fuseholders |
| 4299 | Outline of Investigation for Power Over HDBaseT (PoH) Cables |
| 4300 | Outline of Investigation for Electrically Heated Insulated Covers for Compressed Gas Cylinders for Use in Hazardous (Classified) Locations |
| 4500 | Environmental Claim Validation Procedure (ECVP) for Cleaning Solution Savings for Floor Scrubber Machines |
| 4703 | PHOTOVOLTAIC WIRE |
| 4703 | Standard for Photovoltaic Wire |
| 4730 | Standard for Nameplate, Datasheet, and Sampling Requirements of Photovoltaic Modules |
| Jan-85 | Low Voltage Transformers - Part 1: General Requirements |
| Feb-85 | Low Voltage Transformers - Part 2: General Purpose Transformers |
| Mar-85 | Low Voltage Transformers - Part 3: Class 2 and Class 3 Transformers |
| 5500 | Standard for Safety for Remote Software Updates |
| 5703 | Outline of Investigation for Determination of the Maximum Operating Temperature Rating of Photovoltaic (PV) Backsheet Materials |
| 5770 | Recommended Practice for Evaluating Cables for Use in Repeated Flexing Applications |
| 6059 | Outline of Investigation for Particular Requirements for Switches for Tools |
| 6141 | Standard for Wind Turbines Permitting Entry of Personnel |
| 6142 | Small Wind Turbine Systems |
| 6200 | Standard for Controllers for Use in Power Production |
| 6420 | Standard for Equipment Used for System Isolation and Rated as a Single Unit |
| 6500 | Standard for Audio/Video and Musical Instrument Apparatus for Household, Commercial, and Similar General Use |
| 6703 | Standard for Connectors for Use in Photovoltaic Systems |
| 7001 | Sustainability Standard for Household Refrigeration Appliances |
| 7002 | Sustainability Standard for Household Portable and Floor Care Appliances |
| 7003 | Sustainability Standard for Household Clothes Washers |
| 7004 | Sustainability Standard for Household Cooking Appliances |
| 7005 | Sustainability Standard for Household Clothes Drying Appliances |
| 7006 | Sustainability Standard for Household Room Air Conditioning Appliances |
| 7007 | Sustainability Standard for Household Microwave Oven Appliances |
| 7008 | Sustainability Standard for Household Dehumidifier Appliances |
| 7008 | Sustainability Standard for Household Dehumidifier Appliances |
| 7010 | Environmental Claim Validation Procedure (ECVP) for Formaldehyde Reduction |
| 7103 | Outline of Investigation for Building-Integrated Photovoltaic Roof Coverings |
| Jan-00 | Outline of Investigation for Portable Pneumatic Tools |
| 7700-02-01 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Drills and Rotary Hammers |
| 7700-02-02 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Screwdrivers, Ratchets and Impact Wrenches |
| 7700-02-03 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Grinders |
| 7700-02-04 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Sanders, Polishers and Buffers |
| 7700-02-05 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Circular Saws and Circular Knives |
| 7700-02-06 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Percussion Tools and Percussion Hammers |
| 7700-02-08 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Shears and Nibblers |
| 7700-02-11 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Reciprocating Saws |
| 7700-02-14 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Planers |
| 7700-02-17 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Routers and Trimmers |
| 7700-2-30 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Nailers, Staplers and Other Fastening Tools |
| 7700-2-33 | Outline of Investigation for Portable Pneumatic Tools; Part 2: Particular Requirements for Portable Band Saws |
| 7700-2-37 | Outline of Investigation for Pneumatic Tools; Part 2: Particular Requirements for Plate Jointers |
| 8139 | Standard for Electrical Systems of Electronic Cigarettes and Vaping Devices |
| 8203 | Outline of Investigation for Performance Testing for Ingress of Fibrous Indoor Dust |
| 8521 | Outline of Investigation for Aboveground Container Refueling Systems for LP-Gas |
| 8703 | Outline of Investigation for Concentrator Photovoltaic Modules and Assemblies |
| 8750 | Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products |
| 8752 | Organic Light Emitting Diode (OLED) Panels |
| 8752 | Standard for Organic Light Emitting Diode (OLED) Panels |
| 8753 | Standard for Field-Replaceable Light Emitting Diode (LED) Light Engines |
| 8753 | Field-Replaceable Light Emitting Diode (LED) Light Engines |
| 8754 | Standard for Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays |
| 8754 | Holders, Bases, and Connectors for Solid-State (LED) Light Engines and Arrays |
| 8782 | Outline of Investigation for Pollution Control Units for Commercial Cooking Operations |
| 8800 | Standard for Horticultural Lighting Equipment And Systems |
| 9540 | Standard for Energy Storage Systems and Equipment |
| 9540A | Test Method for Evaluating Thermal Runaway Fire Propagation in Battery Energy Storage Systems |
| 9703 | Outline of Investigation for Distributed Generation Wiring Harnesses |
| 9741 | Outline of Investigation for Bidirectional Electric Vehicle (EV) Charging System Equipment |
| 9798 | Environmental Claim Validation Procedure (ECVP) for Biobased Content |
| 9990 | Outline of Investigation for Information and Communication Technology (ICT) Power Cables |
| 10377 | Standard for Consumer Product Safety - Guidelines for Suppliers |
| 116875 | Outline of Investigation for Lead (Pb) Content Verification of Products in Contact with Potable Water |
| 120002 | Certificate Standard for AEx Equipment for Hazardous (Classified) Locations |
| 120101 | Standard for Definitions and Information Pertaining to Electrical Equipment in Hazardous Locations |
| 120202 | Recommendations for the Preparation, Content, and Organization of Intrinsic Safety Control Drawings |
| 120404 | Pressurized Enclosures |
| 121201 | Nonincendive Electrical Equipment for Use in Class I and II, Division 2 and Class III, Divisions 1 and 2 Hazardous (Classified) Locations |
| 121203 | Portable Electronic Products Suitable for Use in Class I and II, Division 2, Class I, Zone 2 and Class III, Division 2 and 2 Hazardous (Classified) Locations |
| 122001 | General Requirements for Electrical Ignition Systems for Internal Combustion Engines in Class I, Division 2 or Zone 2, Hazardous (Classified) Locations |
| 122701 | Standard for Requirements for Process Sealing Between Electrical Systems and Flammable or Combustible Process Fluids |
| 12402-5 | Standard for Personal Flotation Devices - Part 5: Buoyancy Aids (Level 50) - Safety Requirements |
| 12402-9 | ANSI/CAN/UL Standard for Personal Flotation Devices - Part 9: Test Methods |
| 60034-1 | Standard for Rotating Electrical Machines - Part 1: Rating and Performance |
| 60034-2-1 | Standard for Rotating Electrical Machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) |
| 60034-5 | Standard for Rotating Electrical Machines - Part 5: Degrees of Protection Provided by the Integral Design of Rotating Electrical Machines (IP Code) - Classification |
| 60065 | Standard for Audio, Video and Similar Electronic Apparatus - Safety Requirements |
| 60079-0 | Standard for Explosive Atmospheres - Part 0: Equipment - General Requirements |
| 60079-0 | Explosive Atmospheres - Part 0: Equipment - General Requirements |
| 60079-1 | Standard for Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d” |
| 60079-1 | Explosive Atmospheres - Part 1: Equipment Protection by Flameproof Enclosures “d” |
| 60079-2 | Standard for Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure 'p' |
| 60079-2 | Explosive Atmospheres - Part 2: Equipment Protection by Pressurized Enclosure “p” |
| 60079-5 | Standard for Explosive atmospheres - Part 5: Equipment protection by powder filling “q” |
| 60079-6 | Standard for Explosive Atmospheres - Part 6: Equipment Protection by Liquid Immersion 'o' |
| 60079-7 | Standard for Explosive Atmospheres - Part 7: Equipment Protection by Increased Safety ''e'' |
| 60079-7 | Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e' |
| 60079-11 | Explosive Atmospheres - Part 11: Equipment Protection by Intrinsic Safety 'i' |
| 60079-15 | Explosive atmospheres - Part 15: Equipment protection by type of protection 'n' |
| 60079-17 | Standard for Explosive Atmospheres - Part 17: Electrical Installations Inspection and Maintenance |
| 60079-18 | Standard for Explosive Atmospheres - Part 18: Equipment Protection by Encapsulation 'm' |
| 60079-18 | Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
| 60079-25 | Explosive Atmospheres - Part 25: Intrinsically Safe Electrical Systems |
| 60079-26 | Standard for Explosive Atmospheres - Part 26: Equipment with Equipment Protection Level (EPL) Ga |
| 60079-28 | Standard for Explosive Atmospheres - Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation |
| 60079-29-1 | Explosive Atmospheres - Part 29-1: Gas Detectors - Performance Requirements of Detectors for Flammable Gases |
| 60079-29-2 | Explosive Atmospheres - Part 29-2: Gas Detectors - Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen |
| 60079-29-4 | Explosive Atmospheres - Part 29-4: Gas Detectors - Performance Requirements of Open Path Detectors for Flammable Gases |
| 60079-30-1 | Standard for Explosive Atmospheres - Part 30-1: Electrical Resistance Trace Heating - General and Testing Requirements |
| 60079-31 | Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection by Enclosure “t” |
| 60086-4 | Standard For Safety For Primary Batteries - Part 4: Safety Of Lithium Batteries |
| 60320-1 | Appliance Couplers for Household and Similar General Purposes - Part 1: General Requirements |
| 60320-3 | Appliance Couplers for Household and Similar General Purposes - Part 3: Standard Sheets and Gauges |
| 60335-1 | Safety of Household and Similar Appliances, Part 1: General Requirements |
| 60335-1 | Safety of Household and Similar Appliances, Part 1: General Requirements |
| 60335-2-3 | Standard for Safety of Household and Similar Electrical Appliances, Part 2: Particular Requirements for Electric Irons |
| 60335-2-8 | Standard for Household and Similar Electrical Appliances - Safety - Part 2-8: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances |
| 60335-2-8 | Standard for Safety for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Shavers, Hair Clippers, and Similar Appliances |
| 60335-2-24 | Household and Similar Electrical Appliances - Safety - Part 2-24: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers |
| 60335-2-24 | Safety Requirements for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Refrigerating Appliances, Ice-Cream Appliances and Ice-Makers |
| 60335-2-34 | Household and Similar Electrical Appliances - Safety - Part 2-34: Particular Requirements for Motor-Compressors |
| 60335-2-34 | Safety of Household and Similar Electrical Appliances, Part 2-34: Particular Requirements for Motor-Compressors |
| 60335-2-34 | Standard for Household and Similar Electrical Appliances, Part 2: Particular Requirements for Motor-Compressors |
| 60335-2-40 | Household And Similar Electrical Appliances - Safety - Part 2-40: Particular Requirements for Electrical Heat Pumps, Air-Conditioners and Dehumidifiers |
| 60335-2-67 | Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use |
| 60335-2-72 | Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use |
| 60335-2-79 | Household and Similar Electrical Appliances - Safety - Part 2-79: Particular Requirements for High Pressure Cleaners and Steam Cleaners |
| 60335-2-89 | Household and Similar Electrical Appliances - Safety - Part 2-89: Particular Requirements for Commercial Refrigerating Appliances with an Incorporated or Remote Refrigerant Unit or Compressor |
| 60335-2-1000 | Standard for Household and Similar Electrical Appliances: Particular Requirements for Electrically Powered Pool Lifts |
| 60384-14 | Safety Requirements for Fixed Capacitors for Use in Electronic Equipment - Part 14: Sectional Specification: Fixed Capacitors for Electromagnetic Interference Suppression and Connection to the Supply Mains |
| 60601-1 | Medical Electrical Equipment, Part 1: General Requirements for Safety |
| 60691 | Standard for Thermal-Links - Requirements and Application Guide |
| 60692 | Outline of Investigation for Circuit Interrupters with Fire Extinguishing Agent for Use in Electrical Appliances and Components |
| 60730-1 | Automatic Electrical Controls - Part 1: General Requirements |
| 60730-1 | Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements |
| 60730-2-3 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps |
| 60730-2-3 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps |
| 60730-2-4 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Motor-Compressors of Hermetic and Semi-Hermetic Type |
| 60730-2-5 | Automatic Electrical Controls for Household and Similar Use, Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems |
| 60730-2-6 | Standard for Automatic Electrical Controls - Part 2-6: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements |
| 60730-2-6 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements |
| 60730-2-7 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches |
| 60730-2-7 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches |
| 60730-2-8 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements |
| 60730-2-9 | Standard for Automatic Electrical Controls - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| 60730-2-9 | Standard for Automatic Electrical Controls for Household and Similar Use - Part 2-9: Particular Requirements for Temperature Sensing Controls |
| 60730-2-10 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays |
| 60730-2-10A | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays |
| 60730-2-11 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators |
| 60730-2-11A | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators |
| 60730-2-12 | Standard for Automatic Electrical Controls - Part 2-12: Particular Requirements for Electrically Operated Door Locks |
| 60730-2-13 | Standard for Automatic Electrical Controls - Part 2-13: Particular Requirements for Humidity Sensing Controls |
| 60730-2-13A | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls |
| 60730-2-14 | Automatic Electrical Controls - Part 2-14: Particular Requirements for Electric Actuators |
| 60730-2-14 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators |
| 60730-2-15 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls |
| 60730-2-15 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls |
| 60730-2-16A | Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Controls |
| 60730-2-18 | Standard for Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls Including Mechanical Requirements |
| 60730-2-22 | Standard for Automatic Electrical Controls - Part 2-22: Particular Requirements for Thermal Motor Protectors |
| 60745-1 | Hand-Held Motor-Operated Electric Tools - Safety - Part 1: General Requirements |
| 60745-2-1 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-1: Particular Requirements for Drills and Impact Drills |
| 60745-2-2 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches |
| 60745-2-3 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders |
| 60745-2-4 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type |
| 60745-2-5 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-5: Particular Requirements for Circular Saws |
| 60745-2-6 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers |
| 60745-2-8 | Hand-Held Motor-Operated Electric Tools Safety - Part 2-8: Particular Requirements for Shears and Nibblers |
| 60745-2-9 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-9: Particular Requirements for Tappers |
| 60745-2-11 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-11: Particular Requirements for Reciprocating Saws |
| 60745-2-12 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements For Concrete Vibrators |
| 60745-2-13 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-13: Particular Requirements for Chain Saws |
| 60745-2-14 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-14: Particular Requirements for Planers |
| 60745-2-15 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-15: Particular Requirements for Hedge Trimmers |
| 60745-2-16 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-16: Particular Requirements for Tackers |
| 60745-2-17 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-17: Particular Requirements for Routers and Trimmers |
| 60745-2-18 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements For Strapping Tools |
| 60745-2-19 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements For Jointers |
| 60745-2-20 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirements For Band Saws |
| 60745-2-21 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements For Drain Cleaners |
| 60745-2-22 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-22: Particular Requirements For Cut-Off Machines |
| 60745-2-23 | Hand-Held Motor-Operated Electric Tools - Safety - Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools |
| 60855-1 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| 60939-3 | Standard for Passive Filter Units for Electromagnetic Interference Suppression - Part 3: Passive Filter Units for Which Safety Tests are Appropriate |
| 60947-1 | Low-Voltage Switchgear and Controlgear - Part 1: General rules |
| 60947-4-1 | Low-Voltage Switchgear and Controlgear - Part 4-1: Contactors and Motor-Starters - Electromechanical Contactors and Motor-Starters |
| 60947-4-2 | Low-Voltage Switchgear and Controlgear - Part 4-2: Contactors and Motor-Starters - AC Semiconductor Motor Controllers and Starters |
| 60947-5-1 | Low-Voltage Switchgear and Controlgear - Part 5-1: Control Circuit Devices and Switching Elements - Electromechanical Control Circuit Devices |
| 60947-5-2 | Low-Voltage Switchgear and Controlgear - Part 5-2: Control Circuit Devices and Switching Elements - Proximity Switches |
| 60947-5-5 | Standard for Low-Voltage Switchgear and Controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function |
| 60947-7-1 | Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors |
| 60947-7-2 | Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors |
| 60947-7-3 | Low-Voltage Switchgear and Controlgear - Part 7-3: Ancillary Equipment - Safety Requirements for Fuse Terminal Blocks |
| 60947-7-4 | Low-Voltage Switchgear and Controlgear - Part 7-4: Ancillary equipment - PCB terminal blocks for copper conductors |
| 60950-1 | Information Technology Equipment - Safety - Part 1: General Requirements |
| 60950-21 | Information Technology Equipment - Safety - Part 21: Remote Power Feeding |
| 60950-22 | Information Technology Equipment - Safety - Part 22: Equipment to be Installed Outdoors |
| 60950-23 | Information Technology Equipment - Safety - Part 23: Large Data Storage Equipment |
| 60974-1 | Standard for Arc Welding Equipment; Part 1: Welding Power Sources |
| 61010-1 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 1: General Requirements |
| 61010-2-10 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-010: Particular Requirements for Laboratory Equipment for the Heating of Materials |
| 61010-2-11 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-011: Particular Requirements for Refrigerating Equipment |
| 61010-2-12 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-012: Particular Requirements for Climatic and Environmental Testing and Other Temperature Conditioning Equipment |
| 61010-2-20 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-020: Particular Requirements for Laboratory Centrifuges |
| 61010-2-30 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-030: Particular Requirements for Equipment Having Testing or Measuring Circuits |
| 61010-2-32 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-032: Particular Requirements for Hand-Held and Hand-Manipulated Current Sensors for Electrical Test and Measurement |
| 61010-2-33 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-033: Particular Requirements for Hand-Held Multimeters and Other Meters, for Domestic and Professional Use, Capable of Measuring Mains V |
| 61010-2-40 | Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-040: Particular Requirements for Sterilizers and Washer-Disinfectors Used To Treat Medical Materials |
| 61010-2-51 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-051: Particular Requirements for Laboratory Equipment for Mixing and Stirring |
| 61010-2-61 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-061: Particular Requirements for Laboratory Atomic Spectrometers with Thermal Atomization and Ionization |
| 61010-2-81 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-081: Particular Requirements for Automatic and Semi-Automatic Laboratory Equipment for Analysis and Other Purposes |
| 61010-2-91 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-091: Particular Requirements for Cabinet X-Ray Systems |
| 61010-2-101 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 2-101: Particular Requirements for In Vitro Diagnostic (IVD) Medical Equipment |
| 61010-2-201 | Standard for Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part 2-201: Particular Requirements for Control Equipment |
| 61010-31 | Safety Requirements for Electrical Equipment for Measurement, Control and Laboratory Use - Part 031: Safety Requirements for Hand-Held Probe Assemblies for Electrical Measurement and Test |
| 61058-1 | Switches for Appliances - Part 1: General Requirements |
| 61058-1-1 | Switches for Appliances - Part 1-1: Requirements for Mechanical Switches |
| 61058-1-2 | Switches for Appliances - Part 1-2: Requirements for Electronic Switches |
| 61131-2 | Standard for Programmable Controllers - Part 2: Equipment Requirements and Tests |
| 61215-1 | Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Part 1: Test requirements |
| 61215-1-1 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV) modules |
| 61215-1-2 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-2: Special requirements for testing of thin-film Cadmium Telluride (CdTe) based photovoltaic (PV) modules |
| 61215-1-3 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-3: Special requirements for testing of thin-film amorphous silicon based photovoltaic (PV) modules |
| 61215-1-4 | Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-4: Special requirements for testing of thin-film Cu(In,Ga)(S,Se)2 based photovoltaic (PV) modules |
| 61215-2 | Terrestrial Photovoltaic (PV) Modules - Design Qualification and Type Approval - Part 2: Test procedures |
| 61496-1 | Standard for Electro-Sensitive Protective Equipment, Part 1: General Requirements and Tests |
| 61496-2 | Standard for Electro-Sensitive Protective Equipment, Part 2: Particular Requirements for Equipment Using Active Opto-Electronic Protective Devices (AOPDs) |
| 61724-1 | Standard for Photovoltaic System Performance - Part 1: Monitoring |
| 61724-2 | Standard for Photovoltaic System Performance - Part 2: Capacity Evaluation Method |
| 61724-3 | Standard for Photovoltaic System Performance - Part 3: Energy Evaluation Method |
| 61730-1 | Photovoltaic (PV) Module Safety Qualification - Part 1: Requirements for Construction |
| 61730-2 | Photovoltaic (PV) Module Safety Qualification - Part 2: Requirements for Testing |
| 61800-5-1 | Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-1: Safety Requirements - Electrical, Thermal and Energy |
| 61800-5-2 | Standard for Adjustable Speed Electrical Power Drive Systems - Part 5-2: Safety Requirements - Functional |
| 61810-1 | Standard for Electromechanical Elementary Relays - Part 1: General Requirements |
| 61965 | Mechanical Safety for Cathode Ray Tubes |
| 62093 | Balance-of-System Components for Photovoltaic Systems - Design Qualification Natural Environments |
| 62108 | Concentrator Photovoltaic (CPV) Modules and Assemblies - Design Qualification and Type Approval |
| 62109-1 | Standard for Safety of power converters for use in photovoltaic power systems - Part 1: General requirements |
| 62133 | Secondary Cells and Batteries Containing Alkaline or Other Non-Acid Electrolytes - Safety Requirements for Portable Sealed Secondary Cells, and for Batteries Made From Them, for Use in Portable Applications |
| 62275 | Cable Management Systems - Cable Ties for Electrical Installations |
| 62368-1 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| 62368-1 | Audio/video, information and communication technology equipment - Part 1: Safety requirements |
| 62841-1 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 1: General Requirements |
| 62841-2-1 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-1: Particular Requirements For Hand-Held Drills and Impact Drills |
| 62841-2-2 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-2: Particular Requirements For Hand-Held Screwdrivers And Impact Wrenches |
| 62841-2-4 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-4: Particular Requirements For Hand-Held Sanders And Polishers Other Than Disc Type |
| 62841-2-5 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-5: Particular Requirements for Hand-Held Circular Saws |
| 62841-2-8 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-8: Particular Requirements For Hand-Held Shears and Nibblers |
| 62841-2-9 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-9: Particular Requirements For Hand-Held Tappers And Threaders |
| 62841-2-10 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-10: Particular Requirements For Hand-Held Mixers |
| 62841-2-11 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-11: Particular Requirements For Hand-Held Reciprocating Saws |
| 62841-2-14 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-14: Particular Requirements For Hand-Held Planers |
| 62841-2-17 | Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-17: Particular Requirements for Hand-Held Routers |
| 62841-2-21 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 2-21: Particular Requirements For Hand-Held Drain Cleaners |
| 62841-3-1 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1: Particular Requirements For Transportable Table Saws |
| 62841-3-4 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-4: Particular Requirements For Transportable Bench Grinders |
| 62841-3-6 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-6: Particular Requirements For Transportable Diamond Drills With Liquid System |
| 62841-3-9 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-9: Particular Requirements For Transportable Mitre Saws |
| 62841-3-10 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-10: Particular Requirements For Transportable Cut-Off Machines |
| 62841-3-12 | Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 3-12: Particular Requirements for Transportable Threading Machines |
| 62841-3-13 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-13: Particular Requirements For Transportable Drills |
| 62841-3-14 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-14: Particular Requirements for Transportable Drain Cleaners |
| 62841-3-1000 | Outline of Investigation for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 3-1000: Particular Requirements For Transportable Laser Engravers |
| 62841-4-2 | Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - Part 4-2: Particular Requirements For Hedge Trimmers |
| 62841-4-1000 | Outline of Investigation for Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery - Safety - UL 62841-4-1000: Particular Requirements For Utility Machines |
| 63345 | Outline of Investigation for Buoyant Media for Protection Against Full Surface Fires in Fixed Flammable or Combustible Liquid Tanks or Repositories |
| 67377 | Outline of Investigation for Oxygen Reduction Fire Protection System Units |
| 920001 | Performance Requirements for Toxic Tas Detectors |
| 920002 | Installation, Operation, and Maintenance of Toxic Gas-Detection Instruments |
| 920004 | Performance Requirements for Open Path Toxic Gas Detectors |
| 920401 | Performance Requirements for Instruments Used to Detect Oxygen-Deficient/Oxygen-Enriched Atmospheres |
한국 UL Korea
UL, 유엘, UL Korea, UL 인증, 유엘코리아, 해외인증, 전세계인증, UL MARK
korea.ul.com
반응형
'방재영역 > 화재 코드' 카테고리의 다른 글
| NFPA 77, Recommended Practice On Static Electcity-1 (0) | 2020.06.05 |
|---|---|
| IFC(International Fire code) 2018 무료 홈페이지 (0) | 2019.12.18 |
| FM Global Data Sheets (0) | 2019.12.11 |
| NFPA Code list (0) | 2019.12.11 |
댓글